Clean Motor Filter
◀◀
Clean the motor filter after each cleaner use.
1.Remove the filter frame from the dust cup.
2.Shake and brush the dust and dirt from filter.
3.If desired, remove filter from filter frame and launder the filter by hand in warm water (150°F, 65°C) using a mild detergent.
4.Air dry thoroughly.
5.Replace filter over frame.
Replace a dirty or torn filter. Order additional motor filters from The Eureka Company, Bloomington, IL 61701.
Order motor filter, part number 60684.
Remove Battery Pack for Disposal
For information
CAUTION: Do not short circuit or dispose of in fire. Dispose of properly.
A municipal waste will not dispose of the battery pack. Use a recycling center if one is convenient. Otherwise, take or send the battery pack to your nearest Eureka Warranty Service Station. To learn the address of the nearest factory service center call
1.Lay cleaner down on its top.
2.Unscrew the one screw on the bottom, flip unit to the right and unscrew the screw on the side of the handle.
3.Grasp handle with thumb on battery cover. Using thumb push down and slide battery cover toward wrist. This will loosen the battery cover so it can be freed from the cleaner.
4.Remove battery pack and dispose of properly. For more information call
8