Extending the Telescopic Tube, ON/OFF Switch

OPERATING INSTRUCTIONS

Emptying the Dust Cup Container

and Cleaning / Changing the Non-

Woven Pre-Filter, HEPA Filter &

Debris Screen

Warning: Always unplug the unit from electrical outlet before opening the Dust Cup (container).

Important: Do NOT use the vacuum without the HEPA filter in place.

Warning: After each Use - Always remove filter assembly and the dust cup cover with the debris screen, then vigorously “TapClean” HEPA filter and clean debris screen and non- woven pre-filter until no more dust can be removed.

IMPORTANT, Please Note : The “TapClean” HEPA Filter will stop most of the tiniest dust particles from re-entering the air you breathe. In fact it stops 99.97% of all particles as small as 0.3 microns - many times smaller than a human hair!!! Because of this incredible filtration performance, the HEPA Filter will quickly accumulate, inside the white filter folds, many fine dust particles that are difficult to see but which will eventually block or reduce your suction power - if not cleaned properly.

1. To remove the dust cup container,

first press on the dust cup release

button (1) that is located on the dust

cup handle and at the same time

press on the dust cup release button

(2) that is on the side of the upper

housing (Fig. 8). Then pull the dust

cup container out.

2. To empty the dust cup container, press on the trap door release button that is on the back side of the dust cup container. (Fig. 9)

	3. The HEPA filter is	Fig. 9
	located underneath the	Fig. 9
	located underneath the
	dust cup container. (Fig.10)

Remove the non-woven pre-filter. (Fig. 11) Remove the HEPA filter, hold the edges and pull it out slowly.

Non-Woven

Pre-Filter

Fig. 11	HEPA
Fig. 11	Filter
	Filter

Fig. 10

4.Hold the HEPA filter

by the edges and vigorously “TapClean” the HEPA Filter dirty side down on a hard, flat surface until no more dust is observed falling out

	from between the pleats
	from between the pleats	Fig. 12
	of the filter. (Fig. 12) We	Fig. 12
	of the filter. (Fig. 12) We

recommend washing the HEPA filter once a month or when suction appears to be reduced. Let the HEPA filter air dry completely for 24 hours.

5. Rinse the non-woven pre-filter and let

air dry completely.

6. Insert the non-woven pre-filter.

WARNING: Always remove the power plug from the wall outlet before assembling or removing accessories.

EXTENDING THE TELESCOPIC TUBE

Push the plastic button and pull out the smaller tube. See illustration below.

INSERTING THE TELESCOPIC TUBE INTO THE MAIN UNIT

•Insert the telescopic tube into the hole next to the dust cup handle. Make sure that the slot in the handle fits correctly into the opening. (Fig. 1)

•To remove the

telescopic tube, press the telescopic tube release button and pull the tube up.

Fig. 1

ATTACHING THE FLOOR BRUSH TO THE MAIN UNIT

ATTACHING THE HOSE TO THE MAIN UNIT

•Hold the end of the hose.

•Insert the hose into the hose connector (Fig. 3).

Fig. 3

WINDING & UNWINDING THE POWER CORD

This vacuum cleaner is equipped with a convenient cord storage feature. The power cord winds around the two cord holders at the back of the unit. The bottom one has a quick cord release feature.

Turn the cord hook to the left or the right to remove the power cord. (Fig. 4)

Dust

7. Reinstall the HEPA filter in the vacuum.

8. To separate the debris screen from

• Insert the floor brush

into its location, in

ON/OFF SWITCH

Fig. 4

Cup

Release

Button 1

Dust

Cup

Release

Button 2

Fig. 8

the dust cup, hold the dust cup in one

hand and turn the dust cup cover

counter clockwise and pull

apart. To clean the debris

screen, we

recommend that

you rinse it under

lukewarm running

water to remove

the dirt that

	accumulates on it, but	Fig. 13
	always allow it to completely	Fig. 13
	always allow it to completely

air dry before inserting back into the vacuum. (Fig. 13)

the direction of the

arrow. (Fig. 2)

• To remove the

floor brush from the

main unit, press

on the floor brush

release

button

and pull

the floor

brush out.

Fig. 2

•The On/Off switch has two different positions.

•Push on the "I" side to turn the vacuum ON.

•Push on the "O" side to turn the vacuum OFF.

=OFF

=ON

EP602H specifications

The Euro-Pro EP602H is a versatile and innovative vacuum cleaner designed to provide efficient cleaning solutions for both home and office environments. This model stands out with its combination of powerful performance, advanced technology, and user-friendly features, making it a popular choice among consumers seeking an effective cleaning apparatus.

One of the key characteristics of the Euro-Pro EP602H is its strong suction capability. This vacuum is equipped with a robust motor that delivers exceptional suction power, allowing it to easily capture dirt, dust, and debris from a variety of surfaces. Whether it's carpets, hardwood floors, or upholstery, users can count on the EP602H to provide thorough cleaning with minimal effort.

The Euro-Pro EP602H incorporates a multi-cyclonic filtration system, which not only enhances suction performance but also minimizes the need for frequent filter replacement. Unlike traditional vacuum cleaners that rely on bags, this model uses a transparent dust canister that allows users to see when it needs to be emptied. This feature promotes hygiene and convenience, ensuring that users can maintain optimal cleaning efficiency without the hassle of dealing with messy disposal.

Another notable technology featured in the EP602H is its adjustable height settings, which enable users to customize the vacuum's performance based on the type of flooring being cleaned. This adaptability ensures effective cleaning on various surfaces, significantly improving the user's experience.

The vacuum is designed with user comfort in mind, featuring an ergonomic handle that provides a comfortable grip during extended cleaning sessions. Additionally, its lightweight design makes it easy to maneuver around furniture and lift for transport between different areas of the home or office.

The Euro-Pro EP602H is also equipped with specialized attachments, including a crevice tool and dusting brush. These accessories enhance the vacuum's versatility and allow users to tackle tight spaces, corners, and delicate surfaces with ease.

In conclusion, the Euro-Pro EP602H combines powerful suction, advanced filtration technology, and convenience features, making it an excellent choice for those in need of a reliable vacuum cleaner. Its adaptability to various surfaces, ease of maintenance, and user-friendly design truly set it apart in the competitive cleaning equipment market. Whether for everyday cleaning tasks or deeper sanitization efforts, the EP602H ensures a spotless and healthy environment.