Euro-Pro EP602H owner manual Precautionary Measures Operating Instructions

Page 4
Fig. 15
Fig. A
Wash once a month or when suction appears reduced
Warning: Allow 24 hours for drying before replacing in unit.

PRECAUTIONARY MEASURES

OPERATING INSTRUCTIONS

IMPORTANT: If the suction opening in the unit or the hose is BLOCKED, switch off the vacuum cleaner and remove the blocking substance before you start the unit again.

PLEASE NOTE: The white pleated filter material in the HEPA Filter will discolor over time -This is NORMAL and will NOT affect the performance of the filter. If the HEPA Filter

Changing & Cleaning the Pre- Motor Filter

The pre-motor filter is a washable filter but should be replaced every three (3)

1.Do not operate the vacuum cleaner too close to heaters, radiators or cigarette butts.

2.Before inserting the power plug into the wall outlet, make sure that your hands are dry.

3.Before you start vacuuming, make sure to remove large or sharp objects that might damage the dust cup debris screen.

4.When pulling out the power plug from the wall outlet, pull the plug not the power cord.

5.Do not pick up anything that is burning or smoking such as cigarettes, matches or hot ashes.

6.Do not use without ALL filters in place.

is properly "TapCleaned” after each use and suction does not return to 100%, then we suggest that the HEPA filter be “TapCleaned” vigorously until no more dust can be removed, then rinsed

under the faucet and allowed to dry for 24 hours before refitting into the vacuum. (Fig. A) This should be done once a month or when suction appears to be reduced .

CAUTION: The suction hole must be open, free of any obstructions at all times. Otherwise, the motor will overheat and could become damaged.

Warning: Always empty the dust cup container and clean the HEPA filter, Non-Woven Pre-Filter and Debris Screen before each use and during prolonged usage.

Never over fill the dust cup container - remove dirt and clean the HEPA filter, non-woven pre-filter and debris screen when dirt in dust cup is at or below the "MAX" level during prolonged usage or risk motor damage.

If you wash the Hepa filter or the non- woven pre-filter, make sure that they have completely air dried before inserting back in the vacuum.

Please Note: The HEPA Filter is washable. It should, however, be replaced every three (3) to six (6) months to ensure peak performance of your vacuum.

The non-woven pre-filter, pre-motor and post motor filters are washable. They should however be replaced every three (3) months to ensure peak performance of your vacuum. Important: make sure that all filters

months.

Remove the dust cup container, the Non-Woven Pre- Filter and the HEPA filter to remove the pre-motor filter. (Fig 14)

Rinse the pre-motor filter in lukewarm water and air dry the filter completely for 24 hours. Do not use a washing machine to rinse the filter.

Do not use a hair dryer to dry it. Air dry only. Never operate the vacuum without the pre-motor filter in place.

When the filter is dry, replace into the unit and replace the HEPA filter and dust cup container.

A severely soiled or clogged filter should be thoroughly washed with fresh tepid water. A mild detergent can be used if required.

Pre-Motor

Filter

Fig. 14

Changing & Cleaning the Post Motor Filter

The post motor filter is a washable filter but should be replaced every three (3) months.

Remove the filter cover from the front of the unit and remove the filter. (Fig. 15)

Rinse the post motor filter in lukewarm water and air dry the filter completely for 24 hours. Do not use a washing machine to rinse the filter. Do not use a hair dryer to dry it. Air dry only. Never operate the vacuum without the post motor filter in place.

When the filter is dry, replace into the filter cover

and replace the filter cover to the unit.

• A severely soiled or clogged filter should be

3

have completely air dried before re- installing back in the vacuum.

8

thoroughly

washed with fresh tepid water. A mild detergent can be used if required.

Image 4
Contents ONE 1 Year Limited Warranty Ordering Replacement Dust CUP Filters Item # XSH602Please Note For Model EP602HTrouble Shooting Guide Problem Possible Reason Possible SolutionOperating Instructions Getting to Know Your Transformer VAC Motor ThermostatChanging & Cleaning the Pre- Motor Filter Precautionary Measures Operating InstructionsChanging & Cleaning the Post Motor Filter Winding & Unwinding the Power Cord ON/OFF SwitchExtending the Telescopic Tube Inserting the Telescopic Tube Into the Main UnitUsing the Unit AS a Hand Vacuum Using the Unit AS AN UprightAir Driven Turbo Brush

EP602H specifications

The Euro-Pro EP602H is a versatile and innovative vacuum cleaner designed to provide efficient cleaning solutions for both home and office environments. This model stands out with its combination of powerful performance, advanced technology, and user-friendly features, making it a popular choice among consumers seeking an effective cleaning apparatus.

One of the key characteristics of the Euro-Pro EP602H is its strong suction capability. This vacuum is equipped with a robust motor that delivers exceptional suction power, allowing it to easily capture dirt, dust, and debris from a variety of surfaces. Whether it's carpets, hardwood floors, or upholstery, users can count on the EP602H to provide thorough cleaning with minimal effort.

The Euro-Pro EP602H incorporates a multi-cyclonic filtration system, which not only enhances suction performance but also minimizes the need for frequent filter replacement. Unlike traditional vacuum cleaners that rely on bags, this model uses a transparent dust canister that allows users to see when it needs to be emptied. This feature promotes hygiene and convenience, ensuring that users can maintain optimal cleaning efficiency without the hassle of dealing with messy disposal.

Another notable technology featured in the EP602H is its adjustable height settings, which enable users to customize the vacuum's performance based on the type of flooring being cleaned. This adaptability ensures effective cleaning on various surfaces, significantly improving the user's experience.

The vacuum is designed with user comfort in mind, featuring an ergonomic handle that provides a comfortable grip during extended cleaning sessions. Additionally, its lightweight design makes it easy to maneuver around furniture and lift for transport between different areas of the home or office.

The Euro-Pro EP602H is also equipped with specialized attachments, including a crevice tool and dusting brush. These accessories enhance the vacuum's versatility and allow users to tackle tight spaces, corners, and delicate surfaces with ease.

In conclusion, the Euro-Pro EP602H combines powerful suction, advanced filtration technology, and convenience features, making it an excellent choice for those in need of a reliable vacuum cleaner. Its adaptability to various surfaces, ease of maintenance, and user-friendly design truly set it apart in the competitive cleaning equipment market. Whether for everyday cleaning tasks or deeper sanitization efforts, the EP602H ensures a spotless and healthy environment.