
Injury hazard
For safety reasons, the lid w should not be opened while the water is boiling or is very hot. There is a risk of receiving severe scalds.
Cleaning and Care
Danger
Do not open any part of the housing. There are no
Never submerse any parts of the appliance in water or other liquids! This can create the risk of a
Before cleaning the appliance, ....
•first, remove the plug from the power socket and allow the appliance to cool down completely.
•Clean the exterior surfaces and the power cable u with a slightly damp cloth. Be sure to dry the appliance well before taking it back into use.
•Never use detergents, abrasive cleaners or solvents. These can damage the appliance.
In the event of scale deposits:
•Before descaling, remove the pourer sieve (see chapter "Removing/replacing the pouring sieve").
•Obtain any decalcifying agent suitable for kitchen utensils (e.g. decalcifiers for coffee machines) from a hardware shop. Proceed as detailed in the instructions provided for the use of the decalcfying agent.
•For cleaning the stainless steel container bottom you can use a suitable product from a specialist dealer .
Removing the lid
To make the cleaning of the appliance interior easier, you can remove the lid w:
•Open the lid w.
•Press the lid w, as shown in the diagramme, to the rear q.
•You can then pull out the hinge and lift out the lid w, as shown in the diagramme w.
•On reassembly, ensure that the lid w is put in the correct way round. The thickening at the frame of the lid w must point upwards when it is being replaced, and also the level surface of the frame to the handle r. Otherwise, the lid w cannot be closed!
q
w
- 4 -