Operating Elements | Boiling water | |
|
|
|
q Pouring sieve
wLid
e Release button
rHandle
t On/Off switch
yBase
u Power cable
Commissioning
•Before taking the appliance into use, ensure that ...
- the appliance, plug and power cable u are in good working order and...
– all packaging materials have been removed from the appliance.
•Fill the appliance up to the MAX marking with a water and vinegar mixture having a ratio of 6:1 and then bring it to the boil – as described in the next section.
Warning
Do not inhale the vapours escaping during the boiling process! This could lead to irritation of the mucous membranes and an indisposition.
•When the process is finished, pour the water- vinegar mixture away.
•Rinse the kettle out with clear water.
•Fill the appliance to the MAX marking and bring it to the boil.
When done, pour it away also.
Danger
NEVER place the electrical base y adjacent to water – a potentially fatal risk!
Notice
Always use freshly drawn water. Do not consume any water that has already stood in the water boiler for longer than one hour. Do not reboil water that has cooled down. Always pour old water away. Microbes could have formed in it!
•Lift the kettle off of the base when filling it!
•Open the lid w by pressing down on the release button e.
•Hold the carafe upright while filling it. Only in
this way can you correctly read the markings.
Fill the carafe...
–at least to the MIN mark, so that the appliance does not overheat,
–no higher than the MAX mark, so that no boiling
water spills out.
•First close the lid w...
•and then place the carafe on the base y, such that it is standing absolutely upright on the base y.
•Now insert the plug into the power socket.
•Press the ON/OFF switch t down until it engages.
•The integrated blue control lamp in the carafe indicates that the appliance is now heating the water up.
•The appliance switches itself off, and the blue control lamps goes out as soon as the water is on the boil. The ON/OFF switch t springs out.
Warning
Remove the power plug from the wall socket before you take the kettle from the base y. This prevents causing a potential short circuit by water possibly spilling out of the carafe and falling onto live electrical connections in the base y.
- 3 -
