85 cm of 10 cm on
the floor the side
20 cm 10 cm above behind

EDM and arc welding equipment. For Class B equipment is equipment suitable for use in domestic establishments and in establishments directly connected to a low voltage power supply network which supplies buildings used for domestic purposes.

Installing your microwave oven

Place the oven on a flat level surface 85 cm above the floor. The surface should be strong enough to safety bear the weight of the oven.

1.When you install your oven, make sure there is adequate ventilation for your oven by leaving at least 10 cm (4 inches) of space behind and, on the sides of the oven and 20 cm (8 inches) of space above.

2.Remove all packing materials inside the oven.

3.Install the roller ring and turntable. Check that the turntable rotates freely. (Turntable type model only)

4.This microwave oven has to be positioned so that plug is accessible. If the supply cord is damaged, it must be

replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

For your personal safety, plug the cable into a proper AC earthed socket.

Do not install the microwave oven in hot or damp surroundings like next to a traditional oven or radiator. The power supply

specifications of the oven must be respected and any extension cable used must be

of the same standard as the power cable supplied with the oven. Wipe the interior and the door seal with a damp cloth before using your microwave oven for the first time.

Cleaning your microwave oven

The following parts of your microwave oven should be cleaned regularly to prevent grease and food particles from building up:

• Inside and outside surfaces•Door and door seals•Turntable and Roller rings(Turntable type model only) ALWAYS ensure that the door seals are clean and the door closes properly.

English-6

ME83D-1_BAL_DE68-04225B_EN.indd 6

 

 

05/10/2013 10:38:45