CARE AND CLEANING
Container
To prepare your new machine for initial use, follow the steps under Normal Cleaning, below. This will clean the unit and break in the motor.
Normal Cleaning
Always begin with the Variable Speed Dial pointing to the Stop Symbol (
) at the top of the dial.
1.Fill the container half full of warm water and add a few drops of
2.Snap or push the complete
3.Rotate the Variable Speed Dial to 1. Press the Start/Stop switch. Slowly increase the Variable Speed to High. Run the machine for 30 to 60 seconds. Rotate the Variable Speed Dial back to the Stop Symbol (
) at the top of the dial.
4.Rinse and drain the container.
To Sanitise:
Always begin with the Variable Speed Dial pointing to the Stop Symbol (
) at the top of the dial.
1.Follow the cleaning instructions above.
2.Fill the container half full of water and add 1 ½ teaspoons of liquid bleach.
3.Snap or push the complete
4.Rotate the Variable Speed Dial to 1. Press the Start/Stop switch. Slowly increase the Variable Speed to High. Run the machine for 30 to 60 seconds. Rotate the Variable Speed Dial back to the Stop Symbol (
) at the top of the dial.
5.Allow the mixture to stand in the container for an additional 1 ½ minutes.
6.Pour out bleach mixture. Allow container to air dry.
7.Do not rinse after sanitising.
Lid, Lid Cap and Tamper
Separate the lid and lid cap. Wash parts in warm, soapy water. Rinse clean under running water and dry. Reassemble before use.
IMPORTANT: To ensure continued and effective performance, do not put the container, lid, lid cap or tamper in the dishwasher.
17
