Upright Vacuum, Changing the Belt | Euro-Pro EP621HR specs

OPERATING INSTRUCTIONS

GETTING TO KNOW YOUR LIGHTWEIGHT

Changing the Belt

WARNING: Always disconnect

from power source when servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from cleaner suddenly starting.

Occasionally the motorized brush drive belt will require changing, the frequency will depend upon the amount of use your vacuum sees.

•Turn unit “Off” and unplug from wall outlet.

•Remove the motorized floor brush from the main unit. (see page 4)

•Use a Phillips #1 screwdriver and remove the two (2) front screws from the bottom of the motorized floor brush. (Fig. 18)

Screws

•Remove the brush carefully by first lifting the right side of the brush and then the left side of the brush. Be careful not to lose the end caps and washers (x2). (Fig. 18)

•If the belt has broken, remove any loose pieces of broken belt before replacing with new belt.

•To install a new belt, slip one end of the belt over the gears on the motor shaft and then slip the other end over the pulley end of the brush.

•After checking that the end caps and washers are on correctly, re-install the brush assembly.

•Turn the brush assembly by hand to make sure that the belt is not twisted and all rotating parts turn freely.

•Replace the brush cover and screws. (Fig. 21)

UPRIGHT VACUUM

1.	Hand Grip
2.	Hose/Power Cord Holder
3.	Flexible Hose
4.	Removable Hose Handle
5.	Exhaust Filter Cover
6.	Main Unit
7.	Dust Cup Container
8.	Dust Cup Release Lever
9.	Extension Tube
10.	On/Off Switch
11.	Lifting Handle
12.	Crevice Tool
13.	Dusting Brush
14.	Motorized Floor Brush
15.	Quick Release Cord Holder
16.	Lower Cord Holder
17.	Lower Hose Holder
18.	Inlet Hose
19.	Power Cord
20.	Brush Roll Warning Light
21.	Manual Variable Suction
	Control
22.	Trap Door Release Button
23.	Intelli-SenseTMFilter Monitor

Fig. 18

• Remove the brush cover. (Fig. 19)

Fig. 19

					s
				r
		s	h	e
	a		h
W

Fig. 20

		ap	s
		ap
	nd	c
E	nd
E

Fig. 19

Motor Thermostat IMPORTANT: This unit is equipped with a motor protective thermostat. If for some reason the vacuum cleaner should overheat, the thermostat will automatically turn the unit off. Should this occur:

•Push the On/Off button once.

•Disconnect the plug from the power source.

•Check the source of overheating problem. (i.e. clogged hose or filter)

•If clogged hose or filter is found, unclog the hose and replace the filters.

•Wait at least 45 minutes before attempting to reuse the vacuum.

•After unit has cooled down for

45 minutes, plug in the cleaner and push the On/Off button. The vacuum should start again.

•If the vacuum still does not start, contact customer service at

1 (800) 798-7398.

24. Hose Clip

Technical Specifications

Voltage:	120V., 60Hz.
Power:	12 Amps

EP621HR, EP621H specifications

The Euro-Pro EP621H and EP621HR are two stand-out vacuum cleaner models designed for efficient cleaning and ease of use. Both products embody the brand's commitment to combining advanced technology with consumer-friendly design, making cleaning tasks effortless.

The EP621H is a lightweight and compact vacuum cleaner, ideal for homes with various surfaces including carpets, hardwood floors, and tiles. One of its main features is its powerful suction technology, which effectively captures dust, dirt, and allergens. The multi-cyclonic filtration system enhances performance by separating dirt from air, ensuring consistent suction power without clogging.

A notable characteristic of the EP621H is its ergonomic design, featuring a comfortable handle and a user-friendly control interface. This model is equipped with a large dirt container, eliminating the need for frequent emptying during use. Additionally, its washable filters provide convenience and cost efficiency, as they can be reused without the need for replacements.

On the other hand, the EP621HR incorporates similar foundational features but includes enhanced technologies for those seeking a more advanced cleaning solution. This model boasts a pet hair attachment, which is especially beneficial for households with furry companions. The attachment is designed to effectively remove pet hair from upholstery and carpets, reducing allergens and maintaining a cleaner living environment.

Both models share a robust set of characteristics that further enhance user experience. The EP621H and EP621HR are both equipped with a range of accessories, including crevice tools and dusting brushes, allowing users to tackle different surfaces and hard-to-reach areas effortlessly. Their compact size means they can be easily stored in small spaces, making them perfect for city apartments or homes with limited storage capacity.

In terms of performance, both vacuum cleaners are designed for quiet operation, enabling users to clean without disturbing others in the home. The durable construction of the Euro-Pro EP621H and EP621HR ensures longevity and robustness, making them a worthwhile investment for any household.

In conclusion, the Euro-Pro EP621H and EP621HR are excellent choices for consumers seeking reliable, powerful, and versatile vacuum cleaners. With their advanced features, ergonomic designs, and pet-friendly options, they are well-suited for meeting the diverse cleaning needs of modern households.