Hoover Self-Propelled WindTunnel Cleaner manual Belt replacement, Brush roll replacement

Page 10

Belt replacement

The belts are located under the bottom plate of the cleaner and should be checked from time to time to be sure they are in good condition.

The flat (wide) belt is described below; the other is described under “Brush roll replacement”.

When to replace

Disconnect cleaner from electrical outlet.

Warning - Brush roll can start suddenly. Unplug cleaner when it is turned over.

To check the flat belt, remove bottom plate as shown in Fig. 3-9. Replace belt if it is stretched, cut or broken.

What to buy

To assure effective operation, use only genuine HOOVER belts with your clean- er. When purchasing a new belt, ask for: Flat belt - HOOVER part No. 38528035.

3-9

A

Replacing flat belt

Removing bottom plate

Disconnect cleaner from electrical outlet.

Warning - Brush roll can start suddenly. Unplug cleaner when it is turned over.

Place handle in low position and turn cleaner over so bottom side is up.

Remove the 4 screws as shown with a Phillips screw driver.

Lift off bottom plate (A).

3-10

B

C

Removing belt

Flat belt (B) operates the self-propel fea- ture and indirectly drives the brush roll.

Remove used belt (B) from large pulley

(C) and discard.

3-11

D

Positioning back of belt

With lettering on outside of belt, slide new belt over motor shaft (D).

3-12

C

Positioning front of belt

Place other end of belt over large pulley

(C)while rolling the pulley in direction shown.

3-13

Replacing bottom plate

Reposition bottom plate and 4 Phillips head screws. Tighten screws securely.

Brush roll replacement

3-14

When to replace

Disconnect cleaner from electrical outlet.

Warning - Brush roll can start suddenly. Unplug cleaner when it is turned over.

When brush roll brushes are worn, it should be replaced.

10

To check condition of brushes, move the edge of a card across bottom plate while turning brush roll. To maintain cleaning effectiveness, replace brush roll if brushes do not touch card.

What to buy

When purchasing a new brush roll, ask for HOOVER part No. 48414069.

3-15

D

Replacing brush roll

Removing brush roll

Slide Brush Roll Control (Fig. 2-9) to “Hard” (OFF) position.

Turn cleaner over and remove bottom plate (Fig. 3-9).

Lift up brush roll and slide V-belt (D) off brush roll.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents This product was designed for easy Assembly See Fill in and retain Review this manual before Operating cleanerEnglish pp.1-13 Carton contents IndexStep I Attach handle OperationsSelf-propel feature Cleaner descriptionON-OFF Switch Transporting cleanerCleaning lightweight flexible rugs Carrying cleanerCarpet height adjustment Edge cleaningCleaning tools Filter bag Where to buy Changing filter bagWhen to replace What to buyHeadlight replacement Secondary and final filtersReplacing flat belt Belt replacementBrush roll replacement Replacing brush rollLubrication ServiceEdge groomer replacement Thermal protectorClearing blockages Hoover Cleaning PerformanceDisconnect cleaner from electri- cal outlet Checking airflow pathFull One Year Warranty Domestic Use

Self-Propelled WindTunnel Cleaner specifications

The Hoover Self-Propelled WindTunnel Cleaner is a state-of-the-art vacuum designed for modern households seeking efficiency and ease of use in their cleaning routines. One of its standout features is the self-propelling technology, which significantly reduces the physical effort required when vacuuming. This feature allows users to glide the vacuum effortlessly across various floor types, making the cleaning process smoother and less strenuous.

At the heart of the Hoover WindTunnel cleaner is the proprietary WindTunnel technology. This innovative system creates powerful suction that captures dirt and debris from both carpets and hard floors. The vacuum's advanced filtration system, including HEPA filters, captures up to 99.97% of dust, allergens, and particles as small as 0.3 microns, making it an excellent choice for allergy sufferers. The filters are also washable, adding convenience and reducing long-term costs associated with replacements.

Another notable characteristic of the Hoover Self-Propelled WindTunnel Cleaner is its multi-floor capability. With adjustable settings, users can easily switch between cleaning carpets, hardwood floors, and area rugs, ensuring that every surface is thoroughly cleaned without damaging them. The vacuum also features a variety of attachments, including a crevice tool, upholstery nozzle, and dusting brush, which enhance its versatility, allowing users to reach tight spaces and clean different surfaces with ease.

The cleaner’s large capacity dirt cup minimizes the hassle of frequent emptying, making it optimal for deep cleaning larger areas in one go. Additionally, its lightweight design and ergonomic handle enhance maneuverability, ensuring that users can clean expansive spaces without experiencing undue fatigue.

For added convenience, the vacuum includes a cord rewind feature, which allows for easy storage after use. The LED headlights illuminate dark corners and under furniture, ensuring that no dirt is left behind.

Overall, the Hoover Self-Propelled WindTunnel Cleaner combines innovative technology with user-friendly design, making it a top choice for effective and effortless cleaning in today's fast-paced lifestyle. Its features, combined with its commitment to air quality and surface care, make it a reliable companion for any household.
Top Page Image Contents