Hoover Self-Propelled WindTunnel Cleaner manual Secondary and final filters, Headlight replacement

Page 9

Secondary and final filters

3-4

A

Cleaning secondary

filter

Disconnect cleaner from electrical outlet.

The secondary filter (A), located behind the grill in the bottom of bag compartment, protects the motor from dirt particles.

If filter becomes dirty, pull off grill and lift out filter.

Hand wash filter in cold water with mild detergent, then air dry.

Reposition dry filter and grill.

Should you want to replace this filter, ask for HOOVER part No. 38765019.

3-5

B

Replacing final filter

The final filter assists in the filtration process to return clean air to the room.

This filter will become dirty and needs to be replaced about once a year to main- tain efficient filtration.

To remove final filter, first open the door on the side of the cleaner (Fig. 3-6).

Grasp filter (B) and pull it straight out.

Reposition new filter by reversing this procedure.

Should you want to replace this filter, ask for HOOVER part No. 38766021.

Do not operate cleaner without both the secondary and final filter in place.

3-6

C

How to reattach filter door

The filter door is designed with a “break-away“ feature which allows it to snap free if it is pushed open too far.

To reattach, align hinges (C) of cover with slots on sides of filter area.

Press door back into place.

Check brush roll chan- nels

Because your WindTunnel™ cleaner picks up so well, we strongly recom- mend you check for debris accumulation in the channels next to the brush roll when you check the filters. Removing this debris will help maintain you clean- er’s excellent pick up and suction. Remove debris as follows:

Disconnect cleaner from electrical outlet.

Check for debris accumulation by removing bottom plate (Fig. 3-9) and looking in the channels (I) next to the brush roll (Fig. 3-18).

Remove any accumulation.

Reposition bottom plate (Fig. 3-13).

Headlight replacement

What to buy

This cleaner uses a 12 volt, wedge base type 912 bulb, Hoover part No. 27313101.

3-7

Removing lens

Disconnect cleaner from electrical outlet.

Using a Phillips screwdriver, remove the two screws as shown and lift off lens.

3-8

Installing bulb and replacing lens

Pull old bulb straight out of socket. Push new bulb straight into socket until locked in place.

Excessive force is not required.

Reposition lens and secure with the two screws.

Continued

 

9

 

Page 8 Page 10
Image 9
Page 8 Page 10
Contents This product was designed for easy Assembly See Review this manual before Operating cleaner Fill in and retainEnglish pp.1-13 Index Carton contentsOperations Step I Attach handleON-OFF Switch Cleaner descriptionSelf-propel feature Transporting cleanerCarpet height adjustment Carrying cleanerCleaning lightweight flexible rugs Edge cleaningCleaning tools When to replace Where to buy Changing filter bagFilter bag What to buySecondary and final filters Headlight replacementBrush roll replacement Belt replacementReplacing flat belt Replacing brush rollEdge groomer replacement ServiceLubrication Thermal protectorDisconnect cleaner from electri- cal outlet Hoover Cleaning PerformanceClearing blockages Checking airflow pathDomestic Use Full One Year Warranty

Self-Propelled WindTunnel Cleaner specifications

The Hoover Self-Propelled WindTunnel Cleaner is a state-of-the-art vacuum designed for modern households seeking efficiency and ease of use in their cleaning routines. One of its standout features is the self-propelling technology, which significantly reduces the physical effort required when vacuuming. This feature allows users to glide the vacuum effortlessly across various floor types, making the cleaning process smoother and less strenuous.

At the heart of the Hoover WindTunnel cleaner is the proprietary WindTunnel technology. This innovative system creates powerful suction that captures dirt and debris from both carpets and hard floors. The vacuum's advanced filtration system, including HEPA filters, captures up to 99.97% of dust, allergens, and particles as small as 0.3 microns, making it an excellent choice for allergy sufferers. The filters are also washable, adding convenience and reducing long-term costs associated with replacements.

Another notable characteristic of the Hoover Self-Propelled WindTunnel Cleaner is its multi-floor capability. With adjustable settings, users can easily switch between cleaning carpets, hardwood floors, and area rugs, ensuring that every surface is thoroughly cleaned without damaging them. The vacuum also features a variety of attachments, including a crevice tool, upholstery nozzle, and dusting brush, which enhance its versatility, allowing users to reach tight spaces and clean different surfaces with ease.

The cleaner’s large capacity dirt cup minimizes the hassle of frequent emptying, making it optimal for deep cleaning larger areas in one go. Additionally, its lightweight design and ergonomic handle enhance maneuverability, ensuring that users can clean expansive spaces without experiencing undue fatigue.

For added convenience, the vacuum includes a cord rewind feature, which allows for easy storage after use. The LED headlights illuminate dark corners and under furniture, ensuring that no dirt is left behind.

Overall, the Hoover Self-Propelled WindTunnel Cleaner combines innovative technology with user-friendly design, making it a top choice for effective and effortless cleaning in today's fast-paced lifestyle. Its features, combined with its commitment to air quality and surface care, make it a reliable companion for any household.
Top Page Image Contents