Maintenance, Battery replacement and handling | Uniden EXA 8955

Note on power sources

Battery replacement and handling

When the operating time becomes short, even after a battery is recharged, please replace the battery.

With normal usage, your battery should last about one year.

Please contact your place of purchase for a replacement battery.

Power Failure

During the period that the power is off, you will not be able to make or receive calls with the telephone.

RECYCLING NICKEL- CADMIUM BATTERIES

NICKEL-

CADMIUM

BATTERIES

MUST BE

DISPOSED OF

Ni-CdPROPERLY.

Nickel-cadmium cells are used in the battery pack. Please take your used nickel- cadmium battery packs to a store that recycles nickel- cadmium batteries.

Caution

•Use the specified battery pack.

•Do not remove the battery from the handset to charge it.

•Never throw the battery into a fire, disassemble it, or heat it.

•Do not remove or damage the battery casing.

Maintenance

When slightly dirty

Wipe with a soft, dry cloth.

When very dirty

Wipe with a soft cloth that has been dampened with diluted, neutral detergent. Dry with a dry cloth.

When the charging terminals become dirty

Wipe with a pencil eraser or other contact cleaner.

Caution

Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish.

36

Image 39

Uniden EXA 8955 manual Maintenance, Battery replacement and handling

Contents

Page Introduction Features Controls and functions 50 51 52 Contents Read this first Base unitHandset Checking the package contents Choose the best location Setting up the base Connect the base unit If you want to install the base unit on the wall, see If you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Tone Pulse Mounting the base unit on a wall Standard wall plate mountingIs firmly seated Direct wall plate mounting Status LED Preparing the battery pack Do not use any liquids or solvents Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contacts Other Operations Making a callFrom the handset From the base Receiving a call Handset on the baseHandset off the base Handset ringer tone Adjusting the ringer and ear speaker volume Last phone number entered can be quickly redialed Redialing a call Mute When speaking on the handsetWhen speaking on the base When the phone is ringing From the handeset Storing phone numbers Making calls with memory dialing From the handset Erasing a stored phone number Way conferencing Intercom from the handset to base Transferring a call To transfer from the handset to the baseTo transfer from the base to the handset Integrated answering device Integrated Setting the clock » Choosing between two outgoing messages Setting your greeting» Preset Message » Recording your personal outgoing message Greeting » Announce only feature Selecting the message record timeSelecting a PIN code Setting ring time switch Playing your message Using your answering system Skipping a message Repeating a message » Deleting all messages Deleting a messageVoice memo » Deleting individual message Recording a conversation Command Function Remote access away from home Remote room monitor Changing the digital security code Additional Information Installing the beltclip Headset installationTo attach the beltclip To remove the beltclip Battery replacement and handling Maintenance Symptom Suggestion Troubleshooting Symptom Suggestion Handset SpecificationsGeneral Base unit Index K, LW, X, Y, Z Page