1.4.18Be aware of the mower discharge and direct discharge away from others.
1.4.19Do NOT operate the mower under the influence of alcohol or drugs.
1.4.20Use care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.
1.5MAINTENANCE AND STORAGE
1.5.1For engine maintenance, follow the engine manufacture’s recommendations precisely as stated in the engine manual.
1.5.2Keep engine and engine area free from accumulation of grass, leaves, excessive grease or oil, and other debris which can accumulate in these areas. These materials can become combustible and may result in a fire.
1.5.3Store fuel in a container specifically designed for this purpose in a cool, dry place.
1.5.4Keep the mower and fuel container in locked storage to prevent children from playing or tampering with them.
1.5.5Gasoline powered equipment or fuel containers should not be stored in a basement or any enclosed area where open pilot lights or heat appliances are present.
1.5.6Maximum mowing results and safety can only be achieved if the mower is properly maintained and operated correctly.
1.5.7Check all bolts frequently to maintain proper tightness.
1.5.8Keep all guards, shields, and all safety devices in place and in safe working condition.
1.5.9Frequently check for worn or deteriorating components that could create a hazard.
1.5.10All replacement parts must be the same as or equivalent to the parts supplied as original equipment.
WARNING
POTENTIAL HAZARD
♦Hydraulic fluid escaping under pressure can penetrate skin and cause injury.
WHAT CAN HAPPEN
♦Fluid accidentally injected into the skin must be surgically removed within a few hours by a doctor familiar with this form of injury or gangrene may result.
HOW TO AVOID THE HAZARD
♦Make sure all hydraulic fluid hoses and lines are in good condition and all hydraulic connections and fittings are tight before applying pressure to hydraulic system.
♦Keep body and hands away from pinhole leaks or nozzles that eject high pressure hydraulic fluid.
♦Use cardboard or paper and not hands to find hydraulic leaks.
♦Safely relieve all pressure in the hydraulic system by locking drive levers in neutral and shutting off engine before performing any work on the hydraulic system.
7
