2.9DECK
2.9.1Cutting Width:
36” | 48” |
35.38 in. (89.9 cm) | 47.24 in. (120.0 cm) |
2.9.2Discharge: Right Side
2.9.3 Blade Size: | 36” | 48” | |
| Length | 18.00 in. (45.7 cm) | 16.25 in. (41.3 cm) |
| Qty | 2 | 3 |
2.9.4Type of Drive: Manual engagement of belt with
2.9.5Blade Brake: When the PTO engagement control is move to the disengaged position a friction brake pad stops the rotation of the blades.
2.9.6Deck Mounting: Bolted directly to the engine deck.
2.9.7Cutting Height: Adjusts in 1/4” (.63 cm) increments from 1” (2.5 cm) to 4 1/4” (10.8 cm).
2.10DIMENSIONS
2.10.1 Overall Width: | 36” | 48” | |
| Discharge chute down | 47.0” (119.4 cm) | 57.9” (147.1 cm) |
| Discharge chute up | 36.4” (92.5 cm) | 48.1” (122.2 cm) |
| (Transport only) | ||
|
|
| |
2.10.2Overall Length:
2.10.3Curb Weight:
2.10.4Overall Height:
2.10.5Tread Width:
(to outside of tires)
36” | 48” |
77.3” (196.3 cm) | 72.3” (183.6 cm) |
|
|
36” | 48” |
498 lbs. (226 kg) | 551 lbs. (250 kg) |
|
|
36” | 48” |
43.2” (109.7 cm) | 43.2” (109.7 cm) |
|
|
36” | 48” |
35.6” (90.4 cm) | 40.4” (102.6 cm) |
2.11 TORQUE REQUIREMENTS
BOLT LOCATION | TORQUE |
Blade/Cutter Housing Spindle Bolt | |
Caster Bracket Mounts | |
Cutter Deck/Engine Deck Mount | |
Engine Mounting Bolts | |
Wheel Lug Nuts | |
Wheel Hub Slotted Nut | minimum 100 |
3.OPERATION INSTRUCTIONS
3.1CONTROLS
3.1.1Familiarize yourself with the controls and operation of the unit.
Carefully read the following information about the controls and their operation.
3.1.2Operator Presence Control (OPC) Levers: Located on the upper handle assembly directly above the handle grips (See Figure 1). When these levers are depressed, the OPC system senses that the operator is in the normal operator's position. When the levers are released, the OPC system senses that the operator has moved from the normal operating position and will kill the engine if either the speed control lever is not in the neutral position or the PTO is engaged.
11
