Safety Precautions
SERVICE & MAINTENANCE SAFETY
Maintenance work can be hazardous if not done in a careful manner. All personnel should realize the hazards and strictly follow safe maintenance practices. Failure to comply with these safety precautions may result in serious personal injury and/or death.
•Use only BOXER supplied or approved replacement parts. Imitation parts may lead to unit damage and/or injury to personnel. Warranty may be voided if unauthorized parts and are used.
•Wear the proper protective clothing and personal safety equipment necessary to perform the maintenance or service required.
•Keep the machine free of grass, leaves, or other debris
•Clean up oil or fuel spillage.
WARNING
Fuel or oil leaks or spills can create a fire or explosion hazard.
•Prior to performing maintenance or service, park the unit in a level area away from obstructions and/or work site hazards.
•Be sure the area has adequate light and is well ventilated. NEVER operate the machine inside a closed area.
•
•If the machine requires maintenance, take the machine out of service and attach a "Do Not Operate" tag at the control panel and remove the ignition key.
•If maintenance or repairs require the boom to be raised, securely support the boom.
•Know where all pinch points and rotating parts on the unit are. These areas must be avoided to prevent serious injury.
•Remove only those guards or covers on the component being serviced and replace them immediately upon completion of the work.
•Never attempt to adjust or service engine or machine components while they are hot.
ELECTRICAL SYSTEM HAZARDS
•Prior to working on the electrical system:
–Disconnect battery cables, removing the battery ground cable first.
–When
–Never allow battery cables to contact hydraulic lines or rub against sharp edges.
