26

Selecting the message record time

You can set your answering system to record messages up to one
or four minutes long.
One minute option:
move the
REC TIME
switch to

1

.
Four minutes option:
move the
REC TIME
switch to

4

.
Announce only feature:
The announce only feature plays an outgoing message, but it will
not allow the caller to leave a message. Move the
REC TIME
switch to the

ANN

position.
The message counter LED displays “ ” when system is on
standby.
Prerecorded outgoing message for Announce only feature is:
"Hello, no one is available to take your call."
REC TIME
ANN/4/1

Selecting a PIN code

To play your messages from a remote location, you will need to
enter a two-digit Personal Identification Number (PIN) code
(00-99). To select a PIN, perform the following steps.
1On the base, press and hold
button until a beep sounds and the
LED displays 00.
2To set the first number, press
or to scroll from 00 to 90.
When the desired number appears in
the display, press . This selects
the first number.
3To set the second number, press
or to scroll from 0 to 9.
When the desired number appears in
the display, press . This selects
the second number and then the
entered number is announced.
pin
pin
pin
Press or
multiple times to scroll
through numbers on the
display.
ª
EXA 8955 4th 99.9.24 5:45 PM Page 29