Choose the dialing mode, Pulse | Uniden EXA 8955 manual

Use only the supplied AD-420 AC

adapter. Do not use any other AC Polarity of the plug adapter.

Connect the AC adapter to a continuous power supply.

Place the base unit close to the

AC outlet so that you can unplug the

AC adapter easily.

If your telephone outlet isn't modular,	Modular
contact your telephone company for
assistance.

Choose the dialing mode

PULSE TONE

Depending on your dialing system, set the TONE/PULSE switch as follows:

If your dialing system is	Set the switch to
Tone	TONE
Pulse	PULSE

If you aren't sure of your dialing system

Make a trial call with the TONE/PULSE switch set to TONE.

If the call connects, leave the switch as is; otherwise, set to PULSE.

7

Image 10

Uniden EXA 8955 manual Choose the dialing mode, If your dialing system is Set the switch to Tone, Pulse

Contents

Page Features Introduction Controls and functions 50 51 52 Contents Base unit Read this firstHandset Checking the package contents Setting up the base Choose the best location If you want to install the base unit on the wall, see Connect the base unit Pulse Choose the dialing modeIf your dialing system is Set the switch to Tone If you arent sure of your dialing system Standard wall plate mounting Mounting the base unit on a wallIs firmly seated Direct wall plate mounting Preparing the battery pack Status LED Cleaning the battery contacts Battery use time per chargeWhen the battery charge becomes low Do not use any liquids or solvents From the base Making a callFrom the handset Other Operations Handset on the base Receiving a callHandset off the base Adjusting the ringer and ear speaker volume Handset ringer tone Redialing a call Last phone number entered can be quickly redialed When the phone is ringing When speaking on the handsetWhen speaking on the base Mute Storing phone numbers From the handeset Making calls with memory dialing From the handset Erasing a stored phone number Way conferencing Intercom from the handset to base To transfer from the handset to the base Transferring a callTo transfer from the base to the handset Integrated Integrated answering device Setting the clock » Recording your personal outgoing message Greeting Setting your greeting» Preset Message » Choosing between two outgoing messages Selecting the message record time » Announce only featureSelecting a PIN code Setting ring time switch Using your answering system Playing your message Repeating a message Skipping a message » Deleting individual message Deleting a messageVoice memo » Deleting all messages Recording a conversation Remote access away from home Command Function Remote room monitor Additional Information Changing the digital security code Headset installation Installing the beltclipTo attach the beltclip To remove the beltclip Maintenance Battery replacement and handling Troubleshooting Symptom Suggestion Symptom Suggestion Base unit SpecificationsGeneral Handset K, L IndexW, X, Y, Z Page