Standard Door

(Graphics are included later in this section.)

Door Stop Screw

Door Hinge Hole Plug

Door Handle Sealing Screw

Cabinet Hinge Hole Plug

Flat-Head Handle Screw

Round-Head Handle Screw

Door Handle Seal Screw Front

Shoulder Handle Screw

Cabinet

1.Remove ⁵⁄₁₆ in. hex-head hinge screws from handle side and move them to opposite side (see Graphic 1-1).

2.Remove cabinet hinge hole plugs from cabinet top and move them to opposite side hinge holes as shown (see Graphic 1-2).

Freezer door

1.Remove freezer handle assembly as shown. Keep all parts together (see Graphic 2).

2.Remove door hinge hole plug. Move to opposite side as shown (see Graphic 3).

3.Remove door handle sealing screws. Move to opposite side of freezer door as shown (see Graphic 4).

4.Remove door stop. Move to opposite side of freezer door as shown (see Graphic 5).

5.Position handle on opposite side of freezer door. Assemble handles on door as shown (see Graphic 2).

6.Tighten all screws. Set aside door until hinges and refrigerator compartment door are in place.

Refrigerator door

1.Remove refrigerator handle assembly as shown. Keep all parts together (see Graphic 6-1).

2.Remove shoulder handle screw from refrigerator door as shown. Keep all parts together (see Graphic 6-2).

3.Remove door hinge hole plug from refrigerator door. Move to opposite side hinge hole as shown (see Graphic 3).

4.Remove door handle sealing screws. Move to opposite side of refrigerator door as shown (see Graphic 4).

5.Remove door handle seal screw front. Move to opposite side of refrigerator door as shown (see Graphic 7).

6.Position shoulder handle screw on opposite side of refrigerator door and drive screw as shown (see Graphic 6-2).

7.Remove door stop. Move to opposite side of refrigerator door as shown (see Graphic 5).

8.Position refrigerator handle on opposite side of the refrigerator door as shown (see Graphic 6-3). Drive top two screws in handle first. Align lower portion of handle and drive bottom screw.

9.Tighten all screws. Set aside refrigerator door until bottom hinge is installed on product.

Contour Door

(Graphics are included later in this section.)

Round-Head

Door Handle

Door Hinge

Handle Screw

Screw Hole Plug

Hole Plug

Cabinet

1.Remove ⁵⁄₁₆ in. hex-head hinge screws from handle side and move them to opposite side (see Graphic 1-1).

2.Remove cabinet hinge hole plugs from the cabinet top and move them to opposite side hinge holes as shown (see Graphic 1-2).

Doors

1.Remove door hinge hole plug from top of freezer door. Move to opposite side as shown (see Graphic 2).

2.Remove door stop from both the freezer and refrigerator door (see Graphic 3).

NOTE: When reversing the door, the freezer handle becomes the refrigerator door handle and the refrigerator door handle becomes the freezer handle (see Door Handle Reversal graphic).

3.Remove freezer handle assembly as shown. Keep all parts together (see Graphic 4).

4.Remove refrigerator handle assembly as shown. Keep all parts together (see Graphic 5).

5.Rotate and position handle from refrigerator door onto freezer door and assemble as shown (see Graphic 6).

6.Rotate and position handle from freezer door onto refrigerator door and assemble as shown (see Graphic 7).

7.Reinstall door stops to opposite side (see Graphic 8).

Door and Hinge Replacement

NOTE: Graphic may be reversed if door swing is reversed.

1.Replace the parts for the bottom hinge as shown. Tighten screws. Replace the refrigerator door.

NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working.

2.Assemble the parts for the center hinge as shown and tighten all screws (see Center Hinge graphic). Replace the freezer door.

3.Assemble the parts for the top hinge as shown (see Top Hinge graphic). Do not tighten screws completely.

4.Line up the doors so that the bottom of the freezer door aligns evenly with the top of the refrigerator door. Tighten all screws.

Final Steps

1.Check all holes to make sure that hole plugs and screws are in place. Reinstall top hinge cover (see Top Hinge graphic).

2.Replace the base grille (see Base Grille graphic).

3.Plug in refrigerator or reconnect power.

4.Reset the controls (see “Using the Controls” section).

5.Return all removable door parts to doors and food to product.

7

Page 6 Page 8
Page 7
Image 7
KitchenAid 2225409 manual Standard Door, Contour Door, Door and Hinge Replacement, Final Steps
Page 6 Page 8

2225409 specifications

The KitchenAid 2225409 is a versatile kitchen appliance that has gained popularity among culinary enthusiasts and home cooks alike. Renowned for its robust design and powerful performance, this model embodies the essence of quality and functionality that KitchenAid is famous for.

One of the standout features of the KitchenAid 2225409 is its powerful motor. Equipped with a high-performance motor, this appliance can handle various tasks with ease, from mixing and kneading dough to whipping cream and blending ingredients. The motor is designed to offer consistent power, ensuring that even the toughest mixtures can be processed smoothly.

The 2225409 also boasts a durable and stylish construction. Its sleek design not only adds aesthetic appeal to any kitchen but also enables easy cleaning and maintenance. The exterior is designed to resist fingerprints and stains, ensuring the appliance maintains its elegant look even with frequent use.

Another significant characteristic is its versatility. The KitchenAid 2225409 comes with a range of attachments, making it suitable for numerous culinary tasks. From pasta makers to food grinders, these attachments expand the machine’s capabilities, allowing users to explore diverse recipes and cooking techniques.

Technological advancements in the KitchenAid 2225409 include a user-friendly control panel. This intuitive interface allows for easy speed adjustments, enabling precise control over mixing textures and ingredient consistency. This feature is particularly beneficial for achieving the perfect dough, meringue, or batter, as users can fine-tune the speed according to their needs.

Safety is also a priority with the KitchenAid 2225409. The appliance is equipped with a tilt-head design, permitting easy access to the mixing bowl, while ensuring stability during operation. Additionally, the locking mechanism helps secure the head in place, adding an extra layer of safety during use.

In conclusion, the KitchenAid 2225409 is a powerful, versatile, and stylish kitchen appliance that excels in functionality and design. With its robust motor, a wide range of attachments, and user-friendly control features, it stands out as an essential tool for both amateur and professional chefs. Whether for baking, cooking, or food preparation, the KitchenAid 2225409 enhances the culinary experience, making cooking more enjoyable and efficient.
Top Page Image Contents