REFRIGERATOR

INSTALLATION

Unpacking

WARNING

Excessive Weight Hazard

Use two or more people to move and install refrigerator.

Failure to do so can result in back or other injury.

Removing packaging materials

■Remove tape and glue residue from surfaces before turning on the refrigerator. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.

■Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information, see the “Refrigerator Safety” section.

■On some models, shelves, bins, door shelf rails, and other feature parts may be packaged in the Interior FeaturePak. Follow the instructions contained in the package for proper assembly.

■Depending on your model, to remove the protective (transparent) film that is on the nameplate, which is located on the freezer handle, use your fingernail and peel off the film, starting from one side and peeling to the other.

IMPORTANT: Do not remove the white foam air return insert that is located behind the control panel on the ceiling of the refrigerator (on some models). The insert is part of the refrigerator and not part of the packing material. If the insert is removed, ice may migrate down from the freezer and cause icicles to form.

When Moving Your Refrigerator:

Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it.

Do not wiggle or “walk” the refrigerator when trying to move it, as floor damage could occur.

Cleaning before use

After you remove all of the package materials, clean the inside of your refrigerator before using it. See the cleaning instructions in the “Refrigerator Care” section.

Important information to know about glass shelves and covers:

Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use special care when re- moving them to avoid impact from dropping.

Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂ in. (1.25 cm) space on each side and at the top. When installing your refrigerator next to a fixed wall, leave 2 in. (5.08 cm) minimum on each side (depending on your model) to allow for the door to swing open. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.

NOTE: Do not install the refrigerator near an oven, radiator, or other heat source, nor in a location where the temperature will fall below 55°F (13°C).

1/2" (1.25 cm)

2" (5.08 cm)

4

Page 3 Page 5
Page 4
Image 4
KitchenAid 2225409 manual Refrigerator Installation, Unpacking, Location Requirements, Cleaning before use
Page 3 Page 5

2225409 specifications

The KitchenAid 2225409 is a versatile kitchen appliance that has gained popularity among culinary enthusiasts and home cooks alike. Renowned for its robust design and powerful performance, this model embodies the essence of quality and functionality that KitchenAid is famous for.

One of the standout features of the KitchenAid 2225409 is its powerful motor. Equipped with a high-performance motor, this appliance can handle various tasks with ease, from mixing and kneading dough to whipping cream and blending ingredients. The motor is designed to offer consistent power, ensuring that even the toughest mixtures can be processed smoothly.

The 2225409 also boasts a durable and stylish construction. Its sleek design not only adds aesthetic appeal to any kitchen but also enables easy cleaning and maintenance. The exterior is designed to resist fingerprints and stains, ensuring the appliance maintains its elegant look even with frequent use.

Another significant characteristic is its versatility. The KitchenAid 2225409 comes with a range of attachments, making it suitable for numerous culinary tasks. From pasta makers to food grinders, these attachments expand the machine’s capabilities, allowing users to explore diverse recipes and cooking techniques.

Technological advancements in the KitchenAid 2225409 include a user-friendly control panel. This intuitive interface allows for easy speed adjustments, enabling precise control over mixing textures and ingredient consistency. This feature is particularly beneficial for achieving the perfect dough, meringue, or batter, as users can fine-tune the speed according to their needs.

Safety is also a priority with the KitchenAid 2225409. The appliance is equipped with a tilt-head design, permitting easy access to the mixing bowl, while ensuring stability during operation. Additionally, the locking mechanism helps secure the head in place, adding an extra layer of safety during use.

In conclusion, the KitchenAid 2225409 is a powerful, versatile, and stylish kitchen appliance that excels in functionality and design. With its robust motor, a wide range of attachments, and user-friendly control features, it stands out as an essential tool for both amateur and professional chefs. Whether for baking, cooking, or food preparation, the KitchenAid 2225409 enhances the culinary experience, making cooking more enjoyable and efficient.
Top Page Image Contents