Hoover S1223, S1211 manual

Page 24

4.If belt is not broken, pull it off the motor pulley.

5.Return cleaner to bottom side up. Remove agitator and belt.

6.Slip agitator through new belt

(with lettering toward outside of cleaner) and position belt in belt guide. Lower end of belt into opening in cleaner body; reposition agitator.

7.Place the three tabs on bottom plate into slots in front of cleaner body. Snap bottom plate into place over agitator. Turn agitator, making sure the belt is not pinched between agitator and cleaner body. The belt must rotate freely inside the belt guide. If agitator does not turn, remove bottom plate and reposition belt in belt guide.

21

Image 24

Contents

Dual Purpose Vacuum Cleaner R Review This manual before Erating cPeanerFill in and retain Important Safeguards Mbling cleaner This cleaner is intended for house hold useWand Some models only LL-------------l Pushed into the handle as far as possible. Fig Pull cord tight Rails Extra effort may be required + a Press firmly to snap both hooks into handle. FigMake sure all edges of paper Bag are completely inside the bag compartmentOr carpeted stairs during tool use Assembled cleaner will look like the drawing below To use Handle positionsCarpet hei adjustment Lowest setting a Highest setting BCleaners with Four settings No. of Items Ordered Please complete this entire form Please allow 3 to 4 weeks for deliveryPage Gleaming lightweight flexible rugs Attach hose to cleaner Select proper cleaning toolTurn cleaner OFF before attach- ing or removing hose Leaning toMaintenance How to clean toolsTools Clearing obstructions Disconnect cleaner from electrical outlet BagHeadlight Page When to replace Disconnect cleaner from ekctri- cal outletPage Disconnect cleaner from electri- cal outlet AgitatorExtra effort may be required to stretch belt onto pulley If you have a proble LubricationTo push Cleaning Eff ctiveness Per Amp Rating Full One Year Warranty Domestic Use Page Hoover and 0 are registered trademarks