2. Attach power nozzle
a. Attach power nozzle at the end of the extension wand. Be sure the nozzle is locked in place. To release, press down on the center of the plastic spring latch and remove nozzle.
b. Position cord into cord clips on extension wands, placing ex- cess cord between nozzle and bottom cord clip.
c. To attach the hose and extension wands, rotate the plastic latch ring on hose grip to accept the button projection on the extension wands.
Push the handle over the wand so that the button projection fits into the slot. Turn the outer ring on the handle to lock the handle and wand in place.
d. Connect nozzle power cord to receptacle underneath handle.
6