D |
Slide rack down into place. Insert screw at (D) and tighten with a Phillips screw- driver.
Storing hose & tools
Store hose on holder by first positioning hose in front section of holder.
F
E
Continue wrapping hose under lower hook (E). Snap hose end fully into hold- er (F).
Ensure that the hose end is pushed down completely into holder (F).
Position tool in holder at base of cleaner and snap it into place as shown at arrow.
Slide bare floor attachment into holder as shown.
Powered hand tool
The powered hand tool is shipped in a plastic bag for protection. Remove the bag before using the tool by first open- ing tool door.
| H |
| G |
To remove powered hand tool (G), pull it down and outward.
To reposition the tool, reverse this pro- cedure.
To remove the scrub module (H), grasp it at the sides and pull it forward.
To reposition module, fit tabs in the stor- age area into holes on back of module. Push module to snap it securely into position.
This is the proper storage location for the module.
How to reattach tool cover
The tool cover is designed with a break- away feature which allows it to snap free if it is pushed open too far.
To reattach, align hinges of cover with holes on sides of tool storage area.
5