How to replace
Disconnect cleaner from electri- cal outlet.
1.Remove bottom plate, agitator and belt following directions for “How to replace belt.”
2.Discard old agitator and end caps.
3.If the end caps should fall off the agitator, they are different from each other and need to be properly oriented as shown below. End caps should fit tightly on agitator.
FIBER WASHER | FIBER WASHER |
I |
0
END CAP WITHOUT
SIDE PROJECTIONS
“IIV,.,.VII,
BELT
4.Position agitator in nozzle and replace bottom plate, screws and front cover following directions for “How to replace belt.”
11