Azden SGM-1X Battery, SHOCK-MOUNT Holder, Power Switch, LOW-CUT Switch, MIC Output, Sensitivity

Page 2

Thank you for purchasing the Azden SGM-1X microphone. Designed for Video and Audio Professionals, the SGM-1X is a directional super-cardioid shotgun microphone with a wide frequency response and low noise levels.

BATTERY:

The SGM-1X is powered by 1 “AAA” battery (not included). Unscrew the lower half of the short barrel case just below the “Power” switch by turning it counterclockwise. Install 1 fresh “AAA” Alkaline battery, making sure to check polarity, and close the case by turning it clockwise. DO NOT OVERTIGHTEN or you may strip the threads.

SHOCK-MOUNT HOLDER:

The SGM-1X is supplied with a shock-mount holder. This holder can be used on a camera shoe or on a microphone stand. Push the barrel through the center of the elastic bands until it is positioned as shown. To secure the holder to a camera shoe, slide the holder into the camera shoe and tighten the thumbwheel by turning it clockwise. To secure the holder to a microphone stand, screw the holder to the stand by turning it clockwise until it is tight.

NOTE: Two holes are drilled into the bottom of the holder for different diameter microphone stand threads, choose the one that matches your mic stand.

POWER SWITCH:

The SGM-1X has a 2-position power switch.

OFF: Switch the microphone to OFF when not in use to conserve battery life.

ON: Switch the microphone to ON for normal operation.

LOW-CUT SWITCH:

The Sgm-1X has a "Low-Cut" filter switch that is designed to reduce unwanted low frequen- cies from entering the audio. This will reduce low frequency energy created from things like air conditioner compressors. The frequency response is "Flat" when the switch is in the

position while the low frequencies are reduced when the switch in in the

position.

MIC OUTPUT:

The SGM-1X has a balanced XLR output and will work in any low impedance microphone input of 1K ohm or less. This includes balanced XLR or unbalanced ¼" and 3.5mm micro- phone inputs. Due to the wide variety of possible connections and equipment used with the SGM-1X, an output cable is not supplied.

WIRELESS OPTIONS:

You can turn the SGM-1X into a wireless microphone by purchasing one of Azden’s unique XLR plug-in transmitters and matching receiver. For more details contact your Azden dealer or one of the dealers linked at our website: www.azdencorp.com

+-

 

Windscreen

 

Shock Mount Holder

SPECIFICATIONS:

 

FREQUENCY RESPONSE

80-18,000Hz

SENSITIVITY

SUPER CARDIOID -33dB re 1V/Pa

IMPEDANCE

1.5k Ohms @ 1KHz

MAX. SPL INPUT LEVEL

110dB

SIGNAL TO NOISE RATIO

65dB

DYNAMIC RANGE

80dB

BATTERY TYPE

AAA (1.5V) - USE ALKALINE BATTERY

BATTERY CURRENT

0.2 mA

BATTERY LIFE

1000 HOURS w/ALKALINE BATTERY

WEIGHT w/o BATTERY

4.76oz (135grams)

DIMENSIONS

11.8" (300mm) length

 

0.83" (21mm) diameter

OUTPUT TYPE

3-Pin XLR type

SUPPLIED ACCESSORIES

SHOCK MOUNT MIC HOLDER

 

1 WINDSCREEN

Image 2
Contents Azden Corporation SGM-1XSuper-Cardioid Polar Pattern Franklin Square, NY Vox 516.328.7500 faxLOW-CUT Switch BatteryPower Switch Wireless Options

SGM-1X specifications

The Azden SGM-1X is a highly regarded shotgun microphone known for its exceptional audio quality and versatility in various recording scenarios. It is designed primarily for use with camcorders, DSLR cameras, and portable audio recorders, making it an ideal choice for filmmakers, videographers, and content creators who demand reliable and professional sound capture.

One of the standout features of the SGM-1X is its supercardioid pickup pattern. This design enables the microphone to focus on sounds directly in front of it while effectively rejecting ambient noise from the sides and rear. This characteristic is particularly useful in crowded environments, allowing users to isolate the subject's voice or other desired sounds without unwanted background interference.

The microphone boasts a frequency response range of 20Hz to 20kHz, ensuring a full and natural sound reproduction across the audible spectrum. Whether capturing dialogue, sound effects, or musical performances, the SGM-1X delivers clear and detailed audio quality, enhancing the overall production value of any project.

Built for longevity and durability, the SGM-1X features a robust construction that can withstand the rigors of on-location shooting. The microphone comes with a shock mount to minimize handling noise and vibrations, further ensuring clean audio capture even in dynamic environments. Its lightweight design enables easy mounting and maneuverability, making it a practical choice for on-the-go recordings.

The SGM-1X also integrates a built-in low-frequency roll-off switch, allowing users to reduce unwanted low-end rumble and enhance clarity for dialogue and other important audio elements. This feature is essential for capturing high-quality sound in challenging acoustic environments, contributing to a polished final mix.

Powered by a single AA battery, the SGM-1X provides extended usage without the need for external power sources, ensuring reliability during long shooting sessions. Additionally, the microphone includes a standard 3.5mm output, making it compatible with a wide range of recording devices.

In summary, the Azden SGM-1X shotgun microphone combines professional-grade audio performance, user-friendly features, and durable construction, making it a favored choice among audio professionals and content creators alike. With its ability to deliver clear and focused sound, it is an invaluable tool for anyone looking to enhance their video and audio productions.