Hoover Wind Tunnel Canister Cleaner with Powered Hand Tool Powered hand tool Belt replacement

Page 12

Powered hand tool

3 - 28

 

Belt replacement

F

E

Inspecting the belt

The powered hand tool belt is designed to last a long time and is not normally replaced. However, if the belt is cracked, gouged or broken, it should be replaced.

3 - 29

3 - 27

The belt can be seen through the win- dow on the top of the nozzle or by removing the bottom plate and belt guard (Figs. 3-21 and 3-22).

Replacing belt

When replacing belt, ask for HOOVER part no. 38528-037.

1.Remove bottom plate, belt guard and brush roll as described in Figs. 3-21 through 3-23.

2.Grasp turbine (E) and pull firmly to remove.

3.Remove belt from turbine pulley (F). Replace with new belt.

4.With flat sides of turbine retainers (G) pointing down, slide retainers into grooves (H) on both sides of tool hous- ing and snap into place.

5.Replace brush roll, belt guard, and bottom plate as described in Figs. 3-23 through 3-26.

Lubrication

The motor is equipped with two bear- ings that contain sufficient lubrication for the life of the motor. The addition of lubricant could cause damage.

Therefore, do not add lubricant to either motor bearing.

The agitator brush roll is equipped with two ball bearings that should be lubri- cated periodically by a Hoover Factory Service Center or an authorized Hoover Warranty Service Dealer (Depot).

Service

To obtain approved HOOVER service and genuine HOOVER parts, locate the near- est Hoover Factory Service Center or

Authorized Hoover Warranty Service Dealer (Depot) by:

•checking the Yellow Pages under “Vacuum Cleaners - Household” OR -

•checking the list of Factory S e rvice Centers provided with this cleaner OR -

•calling 1 - 8 0 0 - 9 4 4 - 9 2 0 0 for an automated re f e rral of authorized s e rvice outlet locations (U.S. only) O R -

•checking the Service section of The Hoover Company online at www.hoover.com

Please do not send your cleaner to The Hoover Company in North Canton for ser- vice, this will only result in delay.

If further assistance is needed, contact The Hoover Company Consumer Response Center, North Canton, Ohio 44720, Phone: 330-499-9499.

In Canada, contact Hoover Canada, Burlington, Ontario L7R 4A8, Phone: 1-800-263-6376.

Always identify your cleaner by the com- plete model number when requesting information or ordering parts. (The model number appears on the bottom of the cleaner.)

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Hoover English ppP o rtant Safeguard s Assembling cleaner Carton contentsConnect hose, wands and nozzle How to use Cleaner descriptionON-OFF switches Check bag indicatorDeluxe power nozzle Polarized plugCleaning tools Suction regulator11 H How to store cleaner How to clean stairs172 Maintenance Filter bagFilters Secondary and micro Power Nozzle belt replacement 2 0 1 1 8 0 when a belt replacement is n e c e s s a ry113 Agitator brush roll replacement Headlight re p l a c e- m e n tThermal protector Edge groomer replacement Powered hand tool Agitator brush roll replacement21A Powered hand tool Belt replacement ServiceLubrication Inspecting the beltIf you have a problem Clearing blockagesFull One Year Warranty Domestic Use

Wind Tunnel Canister Cleaner with Powered Hand Tool specifications

The Hoover Wind Tunnel Canister Cleaner with Powered Hand Tool embodies a blend of advanced technology and user-friendly design, making it a top choice for households seeking efficiency and thorough cleaning. Its core feature, the Wind Tunnel technology, uses powerful suction to create channels of airflow that effectively lift and remove dirt, debris, and pet hair from various surfaces. This innovative system ensures that even the most stubborn particles are extracted from carpets, upholstery, and hard floors.

One of the standout characteristics of this canister cleaner is its powered hand tool, which enhances versatility in cleaning tasks. This attachment is specifically designed to tackle upholstery and corners, allowing users to clean furniture, stairs, and other hard-to-reach areas with ease. The powered brush roll rotates at high speeds, dislodging dirt and hair while ensuring a deep clean, making it especially beneficial for pet owners.

Furthermore, the Hoover Wind Tunnel Canister Cleaner features a multi-cyclonic filtration system. This technology ensures that the suction power remains strong and consistent by separating dirt and debris from the air. The effective filtration also helps to reduce allergens, making it an ideal choice for households with allergy sufferers.

Another notable characteristic of this canister vacuum is its HEPA filter, which captures 99.97% of dust and allergens as small as 0.3 microns. This not only improves indoor air quality but also adds an extra layer of cleaning efficiency, ensuring that the air your family breathes is as clean as possible.

Portability is a key design aspect of the Hoover Wind Tunnel Canister Cleaner. Weighing significantly less than traditional upright vacuums, it includes a long power cord and a hose that extends to allow users to clean large areas without constantly changing outlets. The canister cleaner is equipped with a variety of onboard tools, including crevice tools and dusting brushes, which further enhance its cleaning capabilities.

In conclusion, the Hoover Wind Tunnel Canister Cleaner with Powered Hand Tool stands out due to its powerful suction, versatile cleaning attachments, multi-cyclonic filtration system, and lightweight design. It is a comprehensive cleaning solution that adapts to the needs of any home while delivering exceptional performance and maintaining air quality. Whether tackling pet hair, dust, or everyday dirt, this canister cleaner is designed to provide a thorough and efficient cleaning experience.
Top Page Image Contents