Hoover WindTunnel Powered hand tool, Replacing brush roll, Agitator brush roll replacement

Page 11

Replacing brush roll

Removing brush roll

Slide Brush Roll Control (Fig. 2-9) to “Hard” (OFF) position.

Turn cleaner over and remove bottom plate (Fig. 3-9).

Lift up brush roll and slide V-belt (D) off brush roll.

Inspecting V-belt

The V-belt is designed to last for a long time and is not normally replaced. However, if V-belt is cracked, gouged or broken, now is a good time to replace it as follows.

Slide flat belt off large pulley as shown in Fig. 3-10.

To remove V-belt, slide back of belt over pulley (C). Then firmly pull on belt and “snap” it out.

Discard used belt. Replace with HOOVER part No. 38528034.

To install new belt (with lettering on out- side of belt), slide back of belt over pulley and pull front of belt toward groove (E) next to pulley.

Belt will “pop” into place.

Positioning belt on brush roll

Before positioning belt onto brush roll, check for debris accumulation as described in Fig. 4-2.

Insert brush roll through belt and posi- tion belt in groove (F) on brush roll.

Installing brush roll

Grasp brush roll and fit it into position by

first sliding end, opposite the belt, into the rectangular slot (G) on side of clean- er.

Push other side of brush roll (H) into place. Belt may fit loosely when proper- ly installed.

Reposition flat belt and bottom plate

(Figs. 3-12 and 3-13).

Powered hand tool

Agitator brush roll replacement

When agitator brush roll brushes are worn, the brush roll should be replaced. Ask for HOOVER part No. 48414088.

2. Unscrew the two Phillips screws and remove belt guard (B).

How to replace

1.Remove tool from hose and turn it so bottom faces up. Press the latches on either side of tool and remove bottom plate (A).

3.Remove agitator including end plates

(C) and discard.

4.Inspect belt to ensure that it is in good condition. If belt is cracked, gouged or broken, replace it (see follow- ing section).

5.Insert brush roll through belt and posi- tion belt over gear teeth (D) on brush roll.

Continued _ I 1

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Hoover English + pp.l-14 Review this manual before Operating cleanerFill in and retain Index Carton contentsHandle Transporting cleaner Cleaner descriptionSelf-propel feature Handle positions Carrying cleanerFeature Carpet height adjustmentStair Cleaning Cleaning toolsAutomatic brush roll indicator IEdge cleaningFilter bag Check bag indicatorWhen to replace Where to buy Changing filter bagLiiflight replace Secondary and final filtersReplacing flat belt Belt replacementBrush roll replacement Replacing brush roll Powered hand toolAgitator brush roll replacement Thermal protector Edge groomer replacementLubrication Checking airflow path ServiceDisconnect cleaner from electri- cal outlet Clearing blockagesChecking under bottom plate Full Two Year WarrantyIf blockage occurs during powered hand tool use Domestic Use

WindTunnel specifications

The Hoover WindTunnel vacuum cleaner is a standout in the world of floor care, known for its innovative features and cutting-edge technologies. Designed for both residential and commercial use, this vacuum is engineered to tackle dirt, debris, and allergens efficiently, making it a popular choice among consumers.

One of the main features of the Hoover WindTunnel is its WindTunnel technology, which creates a powerful airflow that lifts and removes embedded dirt from carpets and other surfaces. This unique system utilizes multiple air channels to prevent dirt from escaping back into the air, ensuring a thorough clean. The result is an impressive suction capability that can handle even the most stubborn messes.

Another significant characteristic of the WindTunnel series is the use of HEPA filtration. The High-Efficiency Particulate Air filter captures up to 99.97% of dust and allergens, making it an excellent choice for allergy sufferers. This technology not only improves indoor air quality but also enhances the overall cleaning performance of the vacuum.

The Hoover WindTunnel also features a range of attachments and tools, designed for versatile cleaning. From crevice tools that access tight spaces to upholstery brushes that tackle fabric surfaces, these attachments help ensure that every inch of your home can be cleaned effectively. Some models even come equipped with a self-propelled feature, reducing the effort needed to maneuver the vacuum across various surfaces.

Another noteworthy aspect of the Hoover WindTunnel is its ergonomic design. The lightweight construction and adjustable handle make it easy to use for extended periods without causing strain. Additionally, the large capacity dirt cup minimizes the frequency of emptying, allowing users to clean larger areas with less interruption.

Durability is also a key feature of the WindTunnel vacuum. Built with high-quality materials, these machines are designed to withstand the demands of everyday cleaning tasks. Many models come with a long warranty period, providing peace of mind to consumers.

In summary, the Hoover WindTunnel offers a synthesis of power, versatility, and design, making it a reliable choice for effective cleaning. With technologies such as WindTunnel suction, HEPA filtration, and a variety of user-friendly features, this vacuum cleaner stands out as a top contender in the market. Whether dealing with pet hair, allergens, or everyday messes, the Hoover WindTunnel proves to be an essential tool for maintaining a clean and healthy home.
Top Page Image Contents