Hoover WindTunnel warranty Secondary and final filters, Liiflight replace

Page 9

Secondary and final filters

Replacing bag door

Reposition bag door by placing tab on bottom of door into opening (C).

Press top of door to snap securely shut.

Cleaning secondary filter

Disconnect cleaner from electrical outlet.

The secondary filter (A), located behind the grill in the bottom of bag compartment, protects the motor from dirt particles.

If filter becomes dirty, pull off grill and lift out filter,

Hand wash filter in cold water with mild detergent, then air dry.

Reposition dry filter and grill.

Should you want to replace this filter, ask for HOOVER part No. 38765019.

Replacing final filter

The final filter assists in the filtration process to return clean air to the room.

The pleated filter will become dirty and needs to be replaced about once a year to maintain efficient filtration. The 3 layer filter (some models) can be washed in the same manner as the secondary filter and reused.

To remove final filter, first open the door on the side of the cleaner (Fig. 3-6).

Grasp filter (B) and pull it straight out.

Reposition new filter by reversing this procedure.

The final filter can be replaced with any of the following filters.

3 layer, washable - HOOVER part No.

40110006

HEPA filter HOOVER part No. 43613022

Do not operate cleaner without both the secondary and final filter in place.

How to reattach filter door

The filter door is designed with a “break- away” feature which allows it to snap free if it is pushed open too far.

To reattach, align hinges (C) of cover with slots on sides of filter area.

Press door back into place.

Check brush roll charm= nels

Because your WindTunnel”cleaner picks up so well, we strongly recommend you

check for debris accumulation in the channels next to the brush roll when you check the filters. Removing this debris will help maintain you cleaner’s excellent pick up and suction. Remove debris as follows:

Disconnect cleaner from electrical outlet.

Check for debris accumulation by removing bottom plate (Fig. 3-9) and looking in the channels next to the brush roll (Fig. 3-18).

Remove any accumulation.

Reposition bottom plate (Fig. 3-13).

lii;flight replace-

What to buy

This cleaner uses a 12 volt, wedge base type 912 bulb, Hoover part No. 27313101.

Removing lens

Disconnect cleaner from electrical outlet.

Using a Phillips screwdriver, remove the two screws as shown and lift off lens.

Continued e 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Hoover Review this manual before Operating cleaner Fill in and retainEnglish + pp.l-14 Index Carton contentsHandle Cleaner description Self-propel featureTransporting cleaner Feature Carrying cleanerCarpet height adjustment Handle positionsAutomatic brush roll indicator Cleaning toolsIEdge cleaning Stair CleaningWhen to replace Check bag indicatorWhere to buy Changing filter bag Filter bagLiiflight replace Secondary and final filtersBelt replacement Brush roll replacementReplacing flat belt Powered hand tool Agitator brush roll replacementReplacing brush roll Edge groomer replacement LubricationThermal protector Disconnect cleaner from electri- cal outlet ServiceClearing blockages Checking airflow pathIf blockage occurs during powered hand tool use Full Two Year WarrantyDomestic Use Checking under bottom plate

WindTunnel specifications

The Hoover WindTunnel vacuum cleaner is a standout in the world of floor care, known for its innovative features and cutting-edge technologies. Designed for both residential and commercial use, this vacuum is engineered to tackle dirt, debris, and allergens efficiently, making it a popular choice among consumers.

One of the main features of the Hoover WindTunnel is its WindTunnel technology, which creates a powerful airflow that lifts and removes embedded dirt from carpets and other surfaces. This unique system utilizes multiple air channels to prevent dirt from escaping back into the air, ensuring a thorough clean. The result is an impressive suction capability that can handle even the most stubborn messes.

Another significant characteristic of the WindTunnel series is the use of HEPA filtration. The High-Efficiency Particulate Air filter captures up to 99.97% of dust and allergens, making it an excellent choice for allergy sufferers. This technology not only improves indoor air quality but also enhances the overall cleaning performance of the vacuum.

The Hoover WindTunnel also features a range of attachments and tools, designed for versatile cleaning. From crevice tools that access tight spaces to upholstery brushes that tackle fabric surfaces, these attachments help ensure that every inch of your home can be cleaned effectively. Some models even come equipped with a self-propelled feature, reducing the effort needed to maneuver the vacuum across various surfaces.

Another noteworthy aspect of the Hoover WindTunnel is its ergonomic design. The lightweight construction and adjustable handle make it easy to use for extended periods without causing strain. Additionally, the large capacity dirt cup minimizes the frequency of emptying, allowing users to clean larger areas with less interruption.

Durability is also a key feature of the WindTunnel vacuum. Built with high-quality materials, these machines are designed to withstand the demands of everyday cleaning tasks. Many models come with a long warranty period, providing peace of mind to consumers.

In summary, the Hoover WindTunnel offers a synthesis of power, versatility, and design, making it a reliable choice for effective cleaning. With technologies such as WindTunnel suction, HEPA filtration, and a variety of user-friendly features, this vacuum cleaner stands out as a top contender in the market. Whether dealing with pet hair, allergens, or everyday messes, the Hoover WindTunnel proves to be an essential tool for maintaining a clean and healthy home.
Top Page Image Contents