Maintenance, Removable brushes | Hoover Deep Cleaner Steam Vacuum

Cleaning upholstery

Read “Before you begin cleaning” instructions on page 9.

Be sure to check the cleaning code on your upholstery. Use your deep cleaner only on upholstery marked “W” or “W/S”.

1.Attach hose and solution tube as instructed in Figs. 3-10 to 3-12.

2.Place handle in upright position.

Agitator brushes will not rotate while handle is in upright position.

3.Fill clean water tank according to instructions for Figs. 2-9 to 2-12.

4.Fill detergent container with HOOVER Carpet/Upholstery Detergent according to instructions for Figs. 2-13 to 2-15.

5.Attach tool to end of hose.

Do not point tools toward people or pets.

6.Dry hands and plug deep cleaner into a properly grounded outlet.

7.Set Wash/Rinse switch to WASH. Turn cleaner ON.

3-21

8.Gently press the tool onto the fabric. Press the trigger and slowly pull the noz- zle over the fabric.

9.Overlap strokes by 1/2 inch to help prevent streaking.

Make additional strokes without pressing the trigger to remove more moisture.

10.To clean in corners or creases, lift the tool one-half inch from the fabric and press the solution trigger.

11.Vacuum up the solution with the tool without pressing the trigger.

12.For heavily soiled areas, it may be necessary to repeat the cleaning process. Make crisscrossing strokes to the original pattern; overlap each pass (Fig. 3-22).

3-22

Make no more than 2 passes with the solution or rinse over any one area to prevent over-wetting and damage to fabric.

If additional cleaning is necessary, wait until the upholstery is completely dry before using the tool again.

13.Empty recovery tank when the motor sound becomes higher pitched and there is a loss in suction (see “Automatic shut-off”, Fig. 2-6).

When finished cleaning, follow “After cleaning” instructions on pages 9 & 10 and “After using tool” instructions on page 12.

4. Maintenance

Removable brushes

Your deep cleaner is equipped with removable brushes for easy cleaning.

To remove brushes

Disconnect cleaner from electrical outlet.

To prevent possible leaking, remove clean water tank and recovery tank. Set tanks aside.

4-1

With handle in upright position, tilt cleaner back until handle rests on the floor.

4-2

Grab brush assembly and pull firmly.

The brushes can be cleaned under run- ning water.

4-3	B	D	B
		D
	A
	A		A
			A
	C

To replace brushes

Align posts (A) on both ends of brush assembly with slots (B) in cleaner hous- ing.

Make sure that the square post (C) also aligns with the square hole (D). Turn brushes slightly until post fits easily into hole.

Press brush assembly firmly to snap into place.

Deep Cleaner Steam Vacuum specifications

The Hoover Deep Cleaner Steam Vacuum is a powerful home cleaning solution designed to tackle deep-seated dirt, stains, and odors in carpets and upholstery. Combining advanced technology with user-friendly features, this steam vacuum offers an effective way to maintain a clean and healthy living environment.

One of the standout features of the Hoover Deep Cleaner is its dual-tank system. This innovative design separates clean water from dirty water, ensuring that only fresh, hot water mixed with cleaning solution is used during the cleaning process. This method not only maximizes cleaning efficiency but also helps prevent muddy water from being redeployed onto carpets, thus providing a thorough clean.

The device employs powerful steam cleaning technology, harnessing the natural cleaning power of high-temperature steam to break down stubborn stains. The steam penetrates the fibers of the carpet, loosening dirt, grime, and allergens that traditional vacuuming may miss. This feature is particularly beneficial for households with pets, as it efficiently addresses pet-related messes and odors.

Equipped with a range of cleaning attachments, the Hoover Deep Cleaner is versatile enough to handle various surfaces. The upholstery tool is perfect for refreshing furniture and cushions, while the crevice tool can reach tight corners and hard-to-reach areas. This ensures a comprehensive clean throughout the home.

Moreover, the Hoover Deep Cleaner incorporates a heat-up feature that allows the water to reach optimal temperatures quickly, which enhances the efficiency of the cleaning process. This is complemented by powerful suction capabilities that not only extract dirt but also help in reducing drying times, making it more convenient for users who want to return to their normal activities promptly.

User ergonomics have not been overlooked. The vacuum is designed to be lightweight and easy to maneuver, ensuring that cleaning does not become a strenuous task. The handle is also adjustable, accommodating different user heights for optimum comfort during use.

Additionally, Hoover's reputation for reliability and durability is reflected in the build quality of the Deep Cleaner Steam Vacuum. The materials used are designed to withstand frequent use while remaining easy to maintain.

In summary, the Hoover Deep Cleaner Steam Vacuum stands out as a holistic solution for those seeking a deep cleaning tool that combines steam technology with user-friendly features. With its dual-tank design, powerful steam capabilities, versatile attachments, and ergonomic build, it ensures that cleaning carpets and upholstery becomes an efficient and effective endeavor.