Hoover U57809RM owner manual Agitator Brush Roll, Powered Hand Tool

Agitator Brush Roll

Disconnect cleaner from electrical outlet.

WARNING: Agitator brush roll can start suddenly. Unplug cleaner before turning it over.

Replacing Agitator Brush Roll

When agitator brushes are worn, the brush roll should be replaced.

Inspecting Agitator Brush Roll

Removing Agitator Brush Roll

4-19

Positioning V-Belt

To check condition of brushes, move edge of a card across bottom plate while turning agitator brush roll. To maintain cleaning effectiveness, replace agitator brush roll if brushes do not touch card.

4-20	Turn carpet height
	adjustment knob to
	lowest setting. Turn
	cleaner over and remove
	bottom plate (Fig. 4-13).
	Lift up agitator brush
	roll and slide V-belt (A)
	off agitator brush roll.
A

Installing Agitator Brush Roll

4-21

A

Insert agitator brush roll through belt and position belt in groove

(A) on agitator brush roll.

4-22

B

A

Grasp agitator brush roll firmly and fit it into position by first sliding end opposite the belt into the rectangular slot (A) on side of cleaner.

Pull other side of agitator brush roll (B) into place. Belt may fit loosely when properly installed.

Agitator Brush Roll: What to Buy

When purchasing a new Agitator Brush Roll, ask for HOOVER part No. 93002361.

Reposition flat belt and bottom plate (Figs. 4-15 to 4-16).

Powered Hand Tool

Replacing Agitator Brush Roll

When agitator brushes are worn, the brush roll should be replaced.

How to Replace

4-23

A

Turn tool so bottom faces up. Press the latches on either side of tool and remove bottom plate (A).

4-24

A

Unscrew the two Phillips screws and remove belt guard (A).

12