CARPET CARE CONTROL SELECTOR
The carpet care control selector raises and lowers the height of the foot.
For typical carpets, the best carpet cleaning is achieved by setting the selector to the SHORT PILE position.
For all other types of carpet try various settings until you get the best result for your carpet.
Ensure that the cleaner is in an upright (parked) position. Rotate knob to position best suited to depth of carpet pile.
Note: Using this cleaner for loop carpets or carpets with pile greater than 30mm is not recommended. Please consult the floorcare/carpet manufacturer’s recommended cleaning instruction before vacuuming.
!IMPORTANT! When cleaning hard floors such as vinyl or linoleum, move the selector knob to the LONG PILE position. Failure to do so may cause damage to the floor surface.
*Certain models only.
CLEANER RELEASE
Unlock the cleaner by pressing down on the pedal with your foot.
POWER SWITCH
To switch the cleaner on or off press down on the pedal with your foot.
- 5 -
CLEANER STORAGE
Turn the cleaner off and remove the plug. Wrap the cord around the cord storage hooks.
For quick release of the full length of the power cord, rotate the top storage hook.
48005382 Jazz IM UK.indd 5
5/15/2012 9:54:25 AM 