TO ATTACH HANDLE TO CLEANER
1.Remove tape and screw from h an d 1 e s o c k e t. Set screw aside for later use.
3.Connect electric plug from bottom of handle to electric plug projecting from handle socket. Make sure plug assembly is positioned as shown in illustration.
3.Push handle into place in handle socket. The excess wire and electric plugs are guided into handle tube.
4.Line up holes in handle and handle socket. Insert screw and tighten with screwdriver. Be sure that screw is tightened securely.
HANDLE
ADJUSTMENTS
The handle on your clean- er has three positions - storage, operating, and low (for reaching under low furniture). The handle can be lowered by step- ping on pedal at the left rear of cleaner. The handle should always be in storage position when cleaning tools are used.