Hoover Breathe Easy owner manual Belt replacement, Installing bulb and reposition- ing hood

Page 11

The headlight

3-4

What to buy This cleaner uses a 12 volt, wedge base type 912 bulb, Hoover P a r t

No. 27313-101.

How to replace

Disconnect cleaner from electrical outlet.

3-5

Installing bulb and reposition- ing hood

Pull old bulb straight out of socket. Push new bulb straight into socket until locked in place.

Removing hood

Excessive force is not required.

Place handle in low position and turn clean- er over.

Hood snaps off by inserting the end of a flat screwdriver into one of the areas (labeled with an arrow) on either side of the cleaner as shown. Push screwdriver out- ward to release hood. Repeat on the other side and remove hood.

Reposition hood and push firmly to snap it into place on the sides and at the front.

Note: It is not necessary to turn the cleaner over and use a screwdriver to remove the hood once you are familiar with the 2 places on the hood (indicated by arrows in Fig. 3-4) that unlatch it. Simply pull the sides of the hood out- ward at those areas and lift off the hood.

Belt replacement

The belt on your HOOVER cleaner caus- es the agitator to rotate and is important for the effective operation of the cleaner. The belt is located under the bottom plate of the cleaner and should be checked from time to time to be sure it is in good condition.

When to replace

To check belt, remove bottom plate as shown in “How to replace belt”. Replace belt if it is stretched, cut or broken.

What to buy

To assure effective operation, use only genuine HOOVER belts with your clean- er. When purchasing a new belt, ask for Hoover part No. 40201190.

3-6

Remove the 2 screws as shown with a

 

Phillips screwdriver.

Lift bottom plate (F) and rotate it off the cleaner.

F

How to replace

Removing bottom plate

Disconnect cleaner from electrical outlet.

Place handle in low position and turn cleaner over.

3-7

Removing used belt

Remove agitator brush roll and used belt.

Discard used belt.

3-8

G

Positioning belt over pulley

With lettering on outside of belt, pinch belt into a loop and twist slightly to slide new belt over motor pulley (G).

3-9

H

Positioning belt over brush roll

Insert brush roll through belt and place belt in belt guide (H) on brush roll.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Reathe Easy Contents P o rtant Safeguard sPlease do not return this product to the store Cleaner AssemblyCarton contents If you need any assistance callUP G Do not plug cleaner in until assembly is totally completeAssemble handle Attach cord Push very firmly to snap both hooks into handle Attach tool rackAttach bag Compartment Tools Handle positions How to userCleaner description Polarized plugEdge cleaning Transporting cleanerAdjustment Cleaning lightweight rugsSelect proper tool Cleaning toolsAttach hose to cleaner 14To clean toolsChanging filter bag MaintenanceFilter bag Positioning belt over pulley Belt replacementInstalling bulb and reposition- ing hood Removing used beltLubrication Agitator brush roll replacementInstalling brush roll Replacing bottom plate Belt storage How to replaceClearing blockages ServiceHoover Cleaning Performance If you have a problemFull One Year Warranty Domestic Use

Breathe Easy specifications

The Hoover Breathe Easy is a revolutionary air purifier designed to enhance indoor air quality, making it a valuable addition to any home or office. With the increasing concern over air pollution and its impact on health, the Breathe Easy stands out due to its innovative features and advanced technologies.

One of the primary characteristics of the Hoover Breathe Easy is its multi-stage filtration system, which includes a HEPA filter designed to capture 99.97% of airborne particles as small as 0.3 microns. This includes dust, pollen, pet dander, and mold spores, ensuring that the air you breathe is clean and fresh. Additionally, it incorporates activated carbon filters that effectively neutralize odors and volatile organic compounds (VOCs), further contributing to a healthier indoor environment.

The Breathe Easy also features smart sensor technology that automatically detects air quality levels in real-time. This responsiveness allows the purifier to adjust its fan speed accordingly, providing optimal airflow while conserving energy. Users can also monitor air quality through an intuitive LED display that changes colors based on the level of pollutants detected, ensuring you are always aware of your environment.

Another noteworthy aspect of the Hoover Breathe Easy is its quiet operation. Equipped with a noise-reduction technology, this air purifier operates at whisper-quiet levels, making it ideal for use in bedrooms, nurseries, and workspaces. The user-friendly design includes a programmable timer, allowing users to set specific times for the purifier to operate, providing convenience and energy efficiency.

Portability is another advantage of the Breathe Easy, with its lightweight design and built-in handle that make it easy to move from room to room. Whether you want to improve air quality in your living room, kitchen, or office, this purifier can accommodate your needs effortlessly.

Moreover, maintaining the Breathe Easy is simple, with washable pre-filters that extend the lifespan of the device while minimizing replacement costs. This eco-friendly approach not only saves money but also contributes to reducing waste.

In summary, the Hoover Breathe Easy combines powerful filtration capabilities, smart technology, quiet operation, and user-friendly features to create a top-tier air purification system. With its commitment to improving indoor air quality, the Breathe Easy is an essential investment for anyone looking to foster a healthier living space.
Top Page Image Contents