Hoover Breathe Easy owner manual Lubrication, Agitator brush roll replacement, How to replace

Page 12

3-10

3-11

3-12

IJ

Installing brush roll

Replacing bottom plate

Belt storage

Grasp brush roll firmly and fit it into position by first sliding belt side into the rectangular slot (I) on side of cleaner.

Pull other side of brush roll (J) into place.

Turn brush roll making sure belt is not pinched between brush roll and cleaner base.

Line up bottom plate with front edge of cleaner and rotate it into position.

Reposition the 2 Phillips head screws. Tighten screws securely.

An extra belt can be stored in the belt storage area located inside the bag compartment.

Open bag door and stretch belt onto pegs as shown.

Replace bag door.

Agitator brush roll replacement

3-13

When to replace

Disconnect cleaner from electrical outlet.

When brush roll brushes are worn, it should be replaced.

To check condition of brushes, move edge of a card across bottom plate while turning brush roll.

To maintain cleaning effectiveness, replace brush roll if brushes do not touch card.

What to buy

When purchasing a new brush roll, ask for HOOVER part No. 48414-081.

How to replace

Disconnect cleaner from electrical outlet.

1.Remove bottom plate, belt and brush roll following directions for Figs. 3-6 and 3-7.

2.Discard old brush roll.

3.Continue following the directions for “Belt replacement” starting with Fig. 3-8 to reposition belt, new brush roll and bottom plate.

Lubrication

The motor is equipped with bearings which contain sufficient lubrication for the life of the motor. The addition of lubricant could cause damage. Do not add lubricant to motor bearings. The agitator is equipped with two ball bearings that should be lubricated peri- odically by a Hoover Factory Service Center or an Authorized Hoover Warranty Service Dealer (Depot).

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Reathe Easy P o rtant Safeguard s ContentsCleaner Assembly Carton contentsIf you need any assistance call Please do not return this product to the storeDo not plug cleaner in until assembly is totally complete Assemble handle Attach cordUP G Attach tool rack Attach bag CompartmentPush very firmly to snap both hooks into handle Tools How to user Cleaner descriptionPolarized plug Handle positionsTransporting cleaner AdjustmentCleaning lightweight rugs Edge cleaningCleaning tools Attach hose to cleaner14To clean tools Select proper toolMaintenance Filter bagChanging filter bag Belt replacement Installing bulb and reposition- ing hoodRemoving used belt Positioning belt over pulleyAgitator brush roll replacement Installing brush roll Replacing bottom plate Belt storageHow to replace LubricationService Hoover Cleaning PerformanceIf you have a problem Clearing blockagesFull One Year Warranty Domestic Use

Breathe Easy specifications

The Hoover Breathe Easy is a revolutionary air purifier designed to enhance indoor air quality, making it a valuable addition to any home or office. With the increasing concern over air pollution and its impact on health, the Breathe Easy stands out due to its innovative features and advanced technologies.

One of the primary characteristics of the Hoover Breathe Easy is its multi-stage filtration system, which includes a HEPA filter designed to capture 99.97% of airborne particles as small as 0.3 microns. This includes dust, pollen, pet dander, and mold spores, ensuring that the air you breathe is clean and fresh. Additionally, it incorporates activated carbon filters that effectively neutralize odors and volatile organic compounds (VOCs), further contributing to a healthier indoor environment.

The Breathe Easy also features smart sensor technology that automatically detects air quality levels in real-time. This responsiveness allows the purifier to adjust its fan speed accordingly, providing optimal airflow while conserving energy. Users can also monitor air quality through an intuitive LED display that changes colors based on the level of pollutants detected, ensuring you are always aware of your environment.

Another noteworthy aspect of the Hoover Breathe Easy is its quiet operation. Equipped with a noise-reduction technology, this air purifier operates at whisper-quiet levels, making it ideal for use in bedrooms, nurseries, and workspaces. The user-friendly design includes a programmable timer, allowing users to set specific times for the purifier to operate, providing convenience and energy efficiency.

Portability is another advantage of the Breathe Easy, with its lightweight design and built-in handle that make it easy to move from room to room. Whether you want to improve air quality in your living room, kitchen, or office, this purifier can accommodate your needs effortlessly.

Moreover, maintaining the Breathe Easy is simple, with washable pre-filters that extend the lifespan of the device while minimizing replacement costs. This eco-friendly approach not only saves money but also contributes to reducing waste.

In summary, the Hoover Breathe Easy combines powerful filtration capabilities, smart technology, quiet operation, and user-friendly features to create a top-tier air purification system. With its commitment to improving indoor air quality, the Breathe Easy is an essential investment for anyone looking to foster a healthier living space.
Top Page Image Contents