Important Safeguards

When using an electric appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER

WARNING

To reduce the risk of ﬁ re, electric shock, or injury:

•Do not use outdoors or on wet surfaces.

•Do not leave vacuum cleaner when plugged in. Turn off the switch and unplug the electrical cord when not in use and before servicing.

•Do not allow to be used as a toy. Close attention is necessary when used by or near children.

•Use only as described in this manual. Use only manufacturerʼs recommended attachments.

•Do not use with damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center before using.

•Do not pull or carry by cord, use cord as a handle, close a door on cord or pull cord around sharp edges or corners. Do not run vacuum cleaner over cord. Keep cord away from heated surfaces.

•Do not use extension cords or outlets with inadequate current carrying capacity.

•Turn off all controls before unplugging.

•Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

•Do not handle plug or vacuum cleaner with wet hands.

•Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airﬂ ow.

•This vacuum cleaner creates suction and contains a revolving brush roll. Keep hair, loose clothing, ﬁ ngers, and all parts of body away from openings and moving parts.

•Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

•Do not use without dust cup ﬁ lter in place.

•Use extra care when cleaning on stairs.

•Do not use to pick up ﬂ ammable or combustible liquids such as gasoline, or use in areas where they may be present.

•Store your cleaner indoors in a cool, dry area.

•Keep your work area well lighted.

•Unplug electrical appliances before vacuuming them.

SAVE THESE INSTRUCTIONS

400 specifications

The Eureka 400 is a groundbreaking piece of machinery that stands out in the realm of industrial equipment, specifically designed to optimize productivity and efficiency in various applications. With its state-of-the-art features and advanced technologies, the Eureka 400 offers significant advantages for businesses seeking to enhance their operational capabilities.

One of the principal features of the Eureka 400 is its robust engine, which delivers powerful performance while maintaining fuel efficiency. This engine is designed with advanced combustion technology that reduces emissions, making the device environmentally friendly. Users can expect high levels of torque and horsepower, allowing the Eureka 400 to perform under the most demanding conditions.

The machine is equipped with an intuitive control system, giving operators the ability to manage its functions seamlessly. This user-friendly interface consists of a digital display that provides real-time feedback on performance metrics, such as fuel consumption, operating hours, and maintenance alerts. The ergonomic design ensures that operators can work with minimal physical strain, thereby enhancing overall productivity.

Another key characteristic of the Eureka 400 is its versatility. This machine can be adapted for a range of applications, from construction to landscaping and agricultural tasks. Its modular design allows for various attachments, making it suitable for lifting, digging, and even transporting materials. This flexibility not only improves efficiency but also minimizes the need for multiple pieces of equipment, leading to cost savings for businesses.

In terms of safety, the Eureka 400 incorporates several features to protect operators and bystanders. The machine includes advanced sensors that monitor its surroundings, helping to prevent accidents. An integrated stability control system ensures that the machine remains balanced, particularly when navigating challenging terrains or carrying heavy loads.

Furthermore, the Eureka 400 is built with durability in mind. Its high-grade materials and robust construction mean that it can withstand the rigors of daily use. The components are designed to be easily accessible, simplifying maintenance and reducing downtime.

In conclusion, the Eureka 400 exemplifies the perfect blend of power, efficiency, and safety, making it a premier choice for industries looking to streamline processes and enhance productivity. With its innovative technologies and user-focused design, it promises to be a valuable asset in various operational settings. As businesses continue to evolve, the Eureka 400 stands ready to meet the challenges of modern industrial demands.