Eureka 4380 Series manual How to Clear Hose Clogs, Hepa Cartridge Filters, Filters in Filter Frame

Page 9

How to Clear Hose Clogs

Note: Turn off the switch and unplug the electrical cord before clearing hose.

1.Step on handle release.

2.Lower handle until cleaner is flat on the floor.

3.Turn the cleaner over so back side faces up.

4.Lift cleaner and rest it against a support or counter.

5.Pull upward on the attached wand portion of the hose assembly and remove from the hose retainer.

6.Check for clogs in the hose retainer and throughout the hose assembly.

7.Use a tool that will not puncture the hose. Clear any debris from the hose retainer or the hose assembly that could restrict the air movement.

8.Flexing the hose may help loosen the clog.

9.After the clog is removed make sure the hose assembly, and handle are reassembled onto the unit.

10.If the clog is hard to remove, check the brush roll area. Remove the hood and clear the hose inlet in the brush roll area.

Hose

Assembly

Attached

Wand

Hose

Retainer

HEPA Cartridge Filters

(Only for models with HEPA cartridge.)

Check the HEPA filters with each disposable dust bag change. Replace twice a year or after every six bag changes.

Latch

Filter Cartridge (One complete unit)

Tabs

To remove HEPA cartridge filters

1.Push down latch and pull filter cassette back.

2.Then lift filter up and remove.

To replace HEPA cartridge filters

1.Place bottom tabs of filter cassette into slots.

2.Rotate filter toward cleaner.

3.Push upward on the latch to secure into place.

NOTE: To have the benefit of a sealed HEPA system, you must use one of the HEPA cartridge filter systems.

Filters in Filter Frame

(Only for models with filter frame)

Check the filter each time dust cup is emptied or as needed. Replace twice a year as needed.

Filter Frame plus filter (depending on your vacuum model)

Filter Filter

Frame

To remove filters from filter frame.

1.Push down latch and pull filter frame back.

2.Then lift filter up and out of filter frame.

To replace filters into filter frame.

1.Place new filter in filter frame. Place bottom tabs of filter frame into slots.

2.Rotate filter frame toward cleaner.

3.Push upward on the latch to secure into place.

Use GENUINE EUREKA replacement filters, HEPA , part no. 61500; Micron, part no. 60801.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Upright Vacuum Cleaner Index Important SafeguardsService Information Thermal Cut OffStep a Attach Hose Step B Attach Handle HOW to AssembleStep E Check Cyclonic Cassette GrooveCleaner Height Setting How To Use Accessories Dusting Side UpholsteryCrevice Tool How To Empty Cyclonic Cassette HOW to MaintainEmptying the Cyclonic Cassette Filter FrameBrush Roll How To Replace Brush Roll BeltBrush Roll Belt Motor Pulley Belt Brush RollHepa Cartridge Filters How to Clear Hose ClogsTo remove Hepa cartridge filters To replace Hepa cartridge filtersMotor Filter To Clean Motor FilterMicron and Hepa Exhaust Filters To Replace Micron or Hepa Exhaust FilterUse 15 watt replacement light bulb, part number HOW to Maintain

4390 Series, 4480 Series, 4490 Series, 4380 Series specifications

The Eureka 4380, 4390, 4490, and 4480 series represent a significant advancement in household cleaning technology, tailored to meet the diverse needs of modern consumers. Each series showcases distinct features, cutting-edge technologies, and specific characteristics aimed at enhancing the user experience while ensuring optimal cleaning performance.

The Eureka 4380 Series is renowned for its lightweight design and portability, making it ideal for quick clean-ups. One of its main features is the Easy Glide system, which facilitates smooth maneuverability across various surfaces. Equipped with a powerful motor and a multi-surface brush roll, the 4380 effectively picks up dirt and debris from carpets and bare floors alike. The HEPA filtration system is a standout characteristic, capturing allergens and improving indoor air quality, which is essential for allergy sufferers.

Next, the Eureka 4390 Series builds upon its predecessor’s strengths. It features advanced suction technology, providing a deeper clean with minimal effort. The 4390 Series also includes a swivel steering mechanism, allowing users to navigate tight spaces with ease. Another highlight is its Smart Clean sensor, which automatically adjusts the suction power based on floor type, ensuring optimal performance. The inclusion of a variety of attachments, such as crevice tools and upholstery brushes, further enhances its versatility.

The Eureka 4490 Series brings even more innovation to household cleaning. This model is equipped with a bagless design, making maintenance simpler and more environmentally friendly. A prominent feature is the transparent dust cup, allowing users to see when it needs emptying. The 4490 also offers a self-cleaning brush roll that prevents hair from tangling, thus reducing maintenance time. With its upgraded filtration system, this series is excellent for pet owners, effectively trapping pet dander and hair.

Finally, the Eureka 4480 Series combines powerful performance with smart technology. It features a digital display that provides real-time feedback on performance metrics, such as battery life and cleaning mode. This series also employs an innovative anti-tangle technology that works to prevent hair from clogging the vacuum. Another characteristic that sets the 4480 apart is its quiet operation mode, making it suitable for use at any time without disturbing the household.

In conclusion, the Eureka 4380, 4390, 4490, and 4480 Series offer a range of powerful, user-friendly vacuum cleaners equipped with advanced technologies. Each series caters to specific cleaning needs while ensuring high efficiency, making them excellent choices for any home.
Top Page Image Contents