Eureka 2270, 2290 Step C Check Disposable Dust Bag, Step D Store Electrical Cord, Cord Hook

Page 6

Step C Check Disposable Dust Bag

Inlet

Tube

Inlet

HandleHole

Latch

4.Remove front cover. Press down on handle latch and lift cover away from cleaner.

5.Check to be sure the paper bag inlet hole is secure on the inlet tube.

Step D Store Electrical Cord

Cord

Hook

6.Replace front bag cover. Place the tabs on the bottom of the front cover into slots at bottom of bag compartment and press cover against unit until it clicks shut.

7.Next wind the cord around the two cord hooks on the right side of cleaner. On some models the upper cord hook turns to release the cord. Turn the hook up to store the cord.

Cord Hook

NOTE: For easier access to bag compartment, when you store the electrical cord use a figure 8 pattern.

8.Secure the plug to the cord to prevent unwinding.

6

Image 6

Contents Owner’s Guide 2270-2290 Series Household TypeImportant Safeguards Conseils DE Sécurité Rating Plate Service InformationGeneral Information Thermal Cut OffHOW to Assemble Step a Attach Handle Step B Store Hose and AccessoriesInlet Tube HandleHole Latch Step C Check Disposable Dust BagStep D Store Electrical Cord Cord HookStore or Use Attachments Clean Under Handle Release HOW to USECleaner Height Setting AdjustmentHow To Use Accessories Crevice Tool Hose RetainerBrush Roll HOW to MaintainHow To Replace Brush Roll Belt Brush Roll BeltDisposable Dust Bag and Filters Bag Change Indicator only for modelsBag Change Indicator Right Side View Brush Roll PulleyTo Remove Bag How To Replace Bags-Style JWe recommend using only Genuine Eureka Bags, Part No To Replace New BagHow to Check and Clear Hose Blockages How to Check and Clear Blockages in Base To Clean Motor Filter Motor FilterHOW to Assemble and USE Stair Cleaning Hose Only on Certain ModelsProblem Solving Cause Solution Page Page Eureka Limited Warranty USA Mexico CanadaQuestions? Do Not Return To Store Call