Eureka 2270, 2290 warranty Problem Solving Cause Solution

Page 16

PROBLEM SOLVING

NOTE: Turn off the switch and unplug the electrical cord before servicing.

PROBLEM

CAUSE

SOLUTION

Motor will not start.

✓ Electric Plug

Push plug securely into outlet.

 

 

Try another outlet.

 

 

Check circuit breaker.

 

 

 

Motor suddenly stops.

✓ Thermal Cut Off

Refer to page 7.

 

 

 

Does not clean the carpet or

✓ Disposable Dust Bag

Change the bag. Hint: If picking up fine dust, the bag

floor.

and Filter(s)

may not look full, but a fine substance tends to reduce

 

 

suction when it blocks the airflow through the paper bag

 

 

and filter(s). Make sure the dust bag is installed properly.

 

 

Make sure bag cover is installed properly.

 

✓ Belt

Replace a cut, loose or out of shape belt.

 

✓ Brush Roll

Clean hair and thread from bristles and end cap area.

 

 

Replace brush roll if bristles are worn.

 

✓ Hose

Remove any clogs from the hose that restrict the airflow.

 

 

 

No suction at the end of the

✓ Disposable Dust Bag

Change the bag. Hint: If picking up fine dust, the bag

hose.

 

may not look full, but a fine substance tends to reduce

 

 

suction when it blocks the airflow through the paper bag.

 

✓ Hose

Remove any clogs from the hose that restrict the airflow.

 

 

Check both ends of the hose. (See pages 12-13)

 

 

 

Noise from the brush roll area.

✓ Brush Roll

Remove hood and clean debris from the brush roll area.

 

✓ Belt

Replace a cut, loose or out of shape belt.

 

 

 

Cleaner is hard to push.

✓ Cleaner Height Setting

Turn adjustment knob to a higher position. Hint: Put

 

 

handle in operating position. Tilt the cleaner back to

 

 

raise the front wheels off floor. Then turn the knob.

 

✓ Belt

Replace a cut, loose and out of shape belt.

 

 

 

Brush roll will not turn.

✓ Belt

Replace cut, loose or out of shape belt.

 

 

 

Burning smell.

✓ Belt

Replace cut, loose or out of shape belt.

 

 

 

Cleaning height knob will not

✓ Cleaner Height Setting

Hint: Put handle in operating position. Tilt the cleaner

slide.

 

back to raise the front wheels off floor. Then slide the

 

 

knob.

 

 

 

Missing parts.

 

Call 1-800-438-7352 between 8:00 a.m. and 4:45 p.m.,

 

 

central standard time, Monday through Friday. Know the

 

 

model and serial numbers when you call.

 

 

 

Questions?

 

Call 1-800-282-2886, 8 a.m. to 7:30 p.m., (CST), Monday

 

 

- Friday. 10:00 a.m. to 6:30 p.m. (CST) Saturday. Know

 

 

the model and serial numbers when you call.

 

 

 

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Owner’s Guide 2270-2290 Series Household TypeImportant Safeguards Conseils DE Sécurité Service Information General InformationRating Plate Thermal Cut OffHOW to Assemble Step a Attach Handle Step B Store Hose and AccessoriesStep C Check Disposable Dust Bag Step D Store Electrical CordInlet Tube HandleHole Latch Cord HookHOW to USE Cleaner Height SettingStore or Use Attachments Clean Under Handle Release AdjustmentHow To Use Accessories Crevice Tool Hose RetainerHOW to Maintain How To Replace Brush Roll BeltBrush Roll Brush Roll BeltBag Change Indicator only for models Bag Change IndicatorDisposable Dust Bag and Filters Right Side View Brush Roll PulleyHow To Replace Bags-Style J We recommend using only Genuine Eureka Bags, Part NoTo Remove Bag To Replace New BagHow to Check and Clear Hose Blockages How to Check and Clear Blockages in Base To Clean Motor Filter Motor FilterHOW to Assemble and USE Stair Cleaning Hose Only on Certain ModelsProblem Solving Cause Solution Page Page Eureka Limited Warranty USA Mexico CanadaQuestions? Do Not Return To Store Call
Top Page Image Contents