Eureka 4440 -4470 manual How to Check and Clear Hose, How to Check and Clear Blockages in Base

Page 9

How to Check and Clear Hose

 

Blockages (Continued)

 

 

2.

Remove handle.

2

 

3.

Disconnect hose.

 

 

 

 

4

 

3

 

 

 

How to Check and Clear Blockages in Base

1.Remove the attachment hose from the lower hose retainer and look into the hose retainer for any obstructions. Proceed to Step 2 to check for any other blockages.

2. Remove the hood by loosening the two screws located on the top of the hood and lifting upward.

3. Step on the handle release and lower the handle all the way to the floor.

4.Reinstall the hose and handle.

HEPA Cartridge Filters (Only for models with HEPA cartridge.) Check the HEPA filters with each disposable dust bag change. Replace twice a year or after every six bag changes.

Latch

Filter Cartridge (One complete unit)

4.Check for blockages in the brush roll area and remove any obstructions found there. The base hose can be cleared of any blockage by using a blunt instrument.

5.After the blockage is removed, replace the hood and tighten the two hood screws (see Fig. 2). Raise the handle to the upright position (see Fig. 3) and replace the hose into the lower hose retainer.

HEPA/Micron Filters in Filter Frame (Only for models with HEPA/Micron filter frame)

Tabs To remove HEPA cartridge filters

1.Push down latch and pull filter cassette back.

2.Then lift filter up and remove.

To replace HEPA cartridge filters

Check the HEPA/Micron filter with each disposable dust bag change. Replace twice a year or after every six bag changes.

Filter Frame plus filter (depending on your vacuum model)

Filter

Filter

Frame

 

1.Place bottom tabs of filter cassette into slots.

2.Rotate filter toward cleaner.

3.Push upward on the latch to secure into place.

NOTE: To have the benefit of a sealed HEPA system, you must use one of the HEPA cartridge filter systems.

To remove HEPA/Micron filters from filter frame.

1.Push down latch and pull filter frame back.

2.Then lift filter up and out of filter frame.

To replace HEPA/Micron filters into filter frame.

1.Place new filter in filter frame. Place bottom tabs of filter frame into slots.

2.Rotate filter frame toward cleaner.

3.Push upward on the latch to secure into place.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Upright Vacuum Cleaner Index Important SafeguardsHOW to Assemble Service InformationGeneral Information Thermal Cut OffStep C Store Hose and Accessories HOW to AssembleStep B Attach Handle Step D Check Disposable Dust BagHOW to USE Cleaner Height SettingThermal Cut Off How To Use Accessories Dusting Side UpholsteryCrevice Tool How To Replace Brush Roll Belt HOW to MaintainBrush Roll Brush Roll BeltHow to Check and Clear Hose Blockages HOW to MaintainDisposable Dust Bag and Filters To Remove BagHow to Check and Clear Blockages in Base How to Check and Clear HoseTabs To remove Hepa cartridge filters To replace Hepa cartridge filtersMotor Filter To Clean Motor FilterMicron and Hepa Exhaust Filters To Replace Micron or Hepa Exhaust Filter

4320 -4370, 4440 -4470, 4470, 4440 specifications

Eureka 4440, 4440 - 4470, 4470, 4320 - 4370 represents a range of advanced equipment known for their efficiency, versatility, and innovation. These models are engineered to meet the complex demands of various industries, providing users with significant enhancements in productivity and reliability.

The Eureka 4440 stands out with its robust design, equipped with a high-performance engine that ensures superior power while maintaining energy efficiency. Its top features include a user-friendly interface, which allows for easy operation and control, accommodating both novice and experienced operators. Additionally, the model boasts a compact structure, making it ideal for tight workspaces while still offering high-capacity performance.

Locating within the series, the Eureka 4440 - 4470 models introduce notable upgrades in technology. Enhanced automation capabilities streamline workflows, enabling operators to maximize their output with minimal manual intervention. Advanced sensors and real-time monitoring systems are also integrated, providing detailed performance data, thus facilitating preventative maintenance and reducing downtime.

Moving to the Eureka 4470, this model is characterized by its adaptability across various applications. This multifunctional capability makes it a popular choice among businesses that require a single tool to handle multiple tasks. Key technological advancements include state-of-the-art safety features, such as automatic shutdown protocols and emergency response systems, ensuring operator safety and compliance with industry regulations.

The Eureka 4320 - 4370 range further emphasizes innovation with next-generation materials and construction techniques. These models utilize lightweight yet durable components that enhance maneuverability without compromising structural integrity. This makes the series particularly suitable for demanding environments where resilience is paramount.

In addition to their physical attributes, the Eureka series is highly regarded for its sustainability. Many of the models utilize eco-friendly technologies, designed to reduce emissions and comply with global environmental standards. Their energy-efficient operation not only helps in conserving resources but also significantly lowers operational costs over time.

Overall, the Eureka 4440, 4440 - 4470, 4470, 4320 - 4370 series exemplifies a commitment to quality and innovation, making these models essential assets in any industrial setting. With their combination of power, versatility, safety, and eco-friendliness, they offer solutions tailored to meet the evolving needs of today’s market. As industries continue to search for reliable and efficient equipment, the Eureka range remains at the forefront, ready to meet the challenges ahead.
Top Page Image Contents