Eureka 470 manual What’s in the carton, Easy assembly, Filter maintenance

Page 4

What’s in the carton

	R’S
NE
OW	DE

GUI		TRATION
	REGIS

Important safeguards

	Turbo nozzle
Wand	Crevice
	Crevice
	tool

Vacuum cleaner

with hand grip and hose

Easy assembly

Please read all instructions before using this

!vacuum cleaner. Moving parts!

Assemble the vacuum cleaner before using.

1) Snap handle grip	2) Slide wand into top of
onto wand.	vacuum until it clicks
	in place.

3) Slide hose support into	4) Store crevice tool on
bracket on back of	side of vacuum.
vacuum. Push to secure.

Filter maintenance

DUST CUP – Empty after each use

Press lever to release bottom	Close bottom lid
lid. Debris will empty.	until it clicks.

FILTER DCF21 – Clean or replace regularly,to maintain suction

Empty debris. Pull back	Pull out filter.
latch to lift off lid.

Clean filters and wash;	Rinse dust cup;
dry THOROUGHLY.	dry THOROUGHLY.

Reinstall filter and screen	Align lid at front; press
inside dust cup.	down until lid snaps
	into place.

Never use vacuum without all filters in place.

BRUSH ROLL – Clean monthly

BELT-86100 – Replace worn, cut or out of shape belt

2

Eureka Customer Service HELPLINE 1-800-282-2886

www.eureka.com

Image 4

Contents

Important instructions Promotional code 470ser11Where to find important vacuum information Before you start your vacuum cleanerImportant Safeguards MotorEasy assembly Filter maintenanceWhat’s in the carton Never use vacuum without all filters in placeHow to identify parts of vacuum cleaner How to use vacuum and accessoriesTo use accessories Get ready to vacuumHow to maintain your vacuum cleaner How to replace brush roll or beltHow to clear a blockage Maintain brush rollHow to maintain turbo nozzle Problem solving Problem Cause Solution