How To Replace Bags–Style AA Filteraire
NOTE: Turn off the switch and unplug the electrical cord before changing dust bag. Never operate the vacuum cleaner without the dust bag or the filter.
NOTE: Style AA Filteraire bags must be used to maintain HEPA grade filtration and prolong the life of the HEPA filter. We recommend using only Genuine Eureka Filteraire Bags, part number 58623.
NOTE: Models without HEPA filter option, may use Style AA bags, part number 58236, rather than Style AA Filteraire.
It may be more convenient to lower the handle to the floor before changing the bag.
To Remove Bag:
Front Cover
Latch |
|
|
A
Front
Cover
B
A.Remove front cover by unlatching the front cover latch and lifting the front cover upward and out.
F
To Replace New Bag:
C.Fold sides on new paper bag below bag collar.
D.Align bag collar hole and notch with hose tube.
E.Place rear of bag collar on ledges. Push back and rotate upward until firmly in place.
F.Make sure collar snaps into position and hose tube is securely inserted into bag collar hole. Tuck bag into bottom and along sides.
G.Align front cover tabs and close cover. Make sure paper bag is not caught under the front cover.
B.Remove left side of bag collar from bag collar retainer. Grasp bag collar; pull down slightly and out to remove bag.
E
E
D | C |
Bag Collar | Bag |
| Side |
12