Bissell 9600 DirtLifter PowerBrushes do not turn, Cleaner not picking up solution, Remedies

Page 20

Troubleshooting

Reduce Spray or No Spray (continued)

Possible Cause

1.Water tank may be empty.

2.Formula tank may be empty.

3.Tank may not be seated completely.

4.Pump may have lost prime.

DirtLifter PowerBrushes do not turn

Possible Cause

1.The brush is off or broken.

2.The unit is in the upright position.

3.Circuit breaker may have tripped.

Cleaner not picking up solution

Possible Causes

1. ReadyTools dial may be at wrong setting.

2.Tank may not be seated properly.

3. Tank may not be assembled properly.

4.Solution or 2-in-1 water tank is empty.

5.2-in-1 water tank has picked up maximum dirty water and red float door has closed.

6.Red float "door" in the tank may have closed as a result of bumping an object or moving machine back and forth too quickly.

20 w w w . b i s s e l l . c o m

Remedies

1.Fill heavy duty bladder with hot tap water.

2.Fill formula tank with BISSELL Fiber Cleansing Formula for cleaning.

3.Turn power OFF ( O ). Remove and reseat tank.

4.Turn power OFF ( O ) and then back ON ( I ). Wait one minute, then depress Trigger.

Remedies

1.Turn power OFF ( O ) and unplug unit from outlet. Follow instructions on page 17.

2.Brushes only rotate when unit is reclined using the detent pedal.

3.Turn the machine OFF ( O ) and unplug from outlet. Check to see if foreign object is caught in brush roll. Remove object. Plug machine back in to reset circuit breaker.

Remedies

1. Set ReadyTools dial to either FLOOR CLEANING or TOOLS setting.

2.Pick up both the 2-in-1 water tank and formula tank and reseat them so they fit snugly on the unit.

3. Check to make sure the "lip" of the nozzle is securely hooked into the groove on bottom of Tank (see page 9).

4.Check fluid levels in heavy duty bladder and formula tank.

5.Empty 2-in-1 water tank. Refill heavy duty bladder with clean hot tap water and replace.

6.Turn the machine OFF ( O ), allowing red float door to release into the open position. Turn unit back ON ( I ) to continue cleaning. Be sure your forward and backward strokes are done at a slower pace.

8 0 0 . 2 3 7 . 7 6 9 1

ug120-4084_9500_908.indd 20

11/18/08 9:03:25 AM

Page 19 Page 21
Image 20
Page 19 Page 21
Contents ProHeat Thanks for buying a Bissell ProHeat 2X CleanShot Manufacturer’s warranty Do not immerseUse indoors only Unplug by grasping the plug, not the cordAccessories Product viewBissell Formulas How to use this guide AssemblyProHeat 2X assembly is now complete Slide upper handle onto lower handleSpecial features Built-in-Heater featureDual DirtLifter PowerBrushes Custom CleanCleanShot Dry AireFlow Gauge In-1 water tankEasy to remove and clean nozzle Before you cleanOperation ReadyTools dialPretreating optional Carpet cleaningOption B CleanShot Set ReadyTools Dial to the floor cleaning setting Remove formula tank from back of machineMachine for a snug fit Line7b. Remove the top of the tank by lifting up on the handle Manufacturer’s tag Cleaning with attachmentsSet Custom Clean for the desired setting Cleaning fluid section Return ReadyTools dial to floor settingAttach the cleaning tool to the end of the hose Coil flex hose around the tool caddyStain removal Hard floor cleaning Check ReadyTools dial. It should be set on floor cleaningPlug into an outlet and turn the power switch and heater on Fill the 2-in-1 water tank with hot tap water and set asideMaintenance and care Machine storageMachine care Allow adequate time for floors to dryHead screwdriver and rinsed clean. Replace after cleaning After carpet is dry, vacuum again to remove hair and fuzzReduce Spray or No Spray TroubleshootingBuilt-in heater ready light does not illuminate DirtLifter PowerBrushes do not turn Cleaner not picking up solutionReadyTools dial may be at wrong setting Reduce Spray or No SprayAuthorized service representative PO Box Grand Rapids MI Attn Consumer ServicesM. 10 p.m. EST M. 8 p.m. ESTReplacement parts Bissell ProHeat Replacement PartsItem Part No Not all parts are included with every modelEarn Rewards Points If your Bissell product should require service Warranty Bissell ProHeatLimited One Year Warranty

9600 specifications

The Bissell 9600 is an advanced carpet cleaner that excels in deep cleaning performance while offering a range of innovative features designed to make the process as efficient and user-friendly as possible. This powerful machine stands out in the crowded market of cleaning devices with its exceptional capabilities in removing tough stains, dirt, and allergens from carpets and upholstery.

One of the primary features of the Bissell 9600 is its dual tank system. This design separates clean water from dirty water, ensuring that users always apply fresh, clean solution for effective cleaning. The clean tank holds water and cleaning solution, while the dirty tank collects the wastewater, making it easy to see when it’s time to empty. This separation not only enhances cleaning efficiency but also simplifies the cleaning process.

The Bissell 9600 is equipped with powerful suction technology that works in tandem with its cleaning brushes. The machine uses rotating brushes to agitate and lift dirt from the carpet fibers while the strong suction removes the loosened debris effectively. This combination of scrubbing and suction results in superior cleaning performance, making it ideal for homes with pets or children.

A key characteristic of the Bissell 9600 is its lightweight design. Unlike many traditional carpet cleaners that can be bulky and cumbersome, the 9600 is easy to maneuver, making it suitable for various spaces and providing excellent portability. This ease of movement is further enhanced by its ergonomic handle, which ensures a comfortable grip during operation.

Another noteworthy technology featured in the Bissell 9600 is the Heatwave Technology. This innovative feature helps to maintain the water temperature throughout the cleaning process, ensuring optimal cleaning effectiveness. Warm water enhances the action of carpet cleaning solutions, leading to better stain removal and a deep clean.

Additionally, the Bissell 9600 comes with a range of specialized tools and accessories, including a tough stain tool and an upholstery tool. These attachments enable users to tackle stains and messes on various surfaces beyond just carpets, such as stairs, furniture, and other fabric surfaces.

In terms of maintenance, the Bissell 9600 is designed for easy upkeep. The formula tanks and cleaning brushes can be easily removed and rinsed, ensuring that the machine stays ready for the next cleaning task.

Overall, the Bissell 9600 combines powerful suction, advanced cleaning technologies, and user-friendly features, making it a reliable choice for those seeking a thorough carpet cleaning solution. Its versatility and ease of use make it suitable for everyday cleaning tasks, helping to maintain a clean and healthy home environment.
Top Page Image Contents