Bissell 9600 warranty Remove formula tank from back of machine, Machine for a snug fit, Line

Page 11

Operation

Carpet cleaning (continued)

2.Remove formula tank from back of machine.

2a.

Fill the formula tank by first unscrewing the

2.

 

cap and insert. Always use genuine BISSELL

 

 

 

formulas to maximize cleaning and for the

 

 

safety of your machine. Fill formula up to the

 

 

line and replace the cap and insert. Place

 

 

formula tank into the slot in the back of the

 

 

machine for a snug fit.

 

2b.

If using the BISSELL 3X Concentrated Fiber

 

 

Cleansing Formula: Add 3 capfuls of 3X

3.

 

Concentrated Fiber Cleansing formula to the

 

formula tank, and then fill with hot water to

 

 

the line.

 

3.

Set Custom Clean Dial. Simply choose one

 

 

of the 4 settings (heavy traffic, normal clean,

RW

 

IA

 

NT

 

SE

 

ER

light clean, or water rinse) and the ProHeat 2X will adjust the right amount of cleaning solution to mix with the heated water to fit your cleaning need.

4.Set ReadyTools Dial to the floor cleaning setting.

5.Plug into a proper outlet and turn the power and heater switches to the ON ( I ) position. Allow 1 minute for the built-in heater to warm-up before cleaning. The ProHeat 2X will be fully warmed and will provide optimal performance after a minute of continuous heated cleaning.

6. Cleaning Strokes. While pressing the trigger,

Power Switch

make one slow forward wet pass and another

 

one back. Let the built-in heater, formula, and

 

DirtLifter PowerBrushes do the work for you.

 

Caution: Do not overwet. Take care not to run

 

over loose objects or edges of area rugs. Stalling

 

brush may result in premature belt failure.

 

Note: Your machine is equipped with a

 

circuit breaker that will automatically shut

 

off the brush if a large or loose object is

 

caught in the brush roll. If that happens, be

 

sure to unplug your machine, remove the

 

foreign object, and then plug the machine

 

back in to reset the circuit breaker.

 

Release the trigger and make one slow

 

forward and backward pass over the same

 

area to remove any residual dirty water and

 

aid in drying. Repeat cleaning passes until

 

solution being pulled up appears clean.

 

Continue passes without pressing the trigger

 

until you can’t see any more water

 

being pulled up.

 

w w w . b i s s e l l . c o m

2a.

4.

FLOOR

CLEANING

5.

Heater Switch

8 0 0 . 2 3 7 . 7 6 9 1

11

ug120-4084_9500_908.indd 11

11/18/08 9:03:15 AM

Page 10 Page 12
Image 11
Page 10 Page 12
Contents ProHeat Thanks for buying a Bissell ProHeat 2X CleanShot Unplug by grasping the plug, not the cord Manufacturer’s warrantyDo not immerse Use indoors onlyProduct view AccessoriesBissell Formulas Slide upper handle onto lower handle How to use this guideAssembly ProHeat 2X assembly is now completeCustom Clean Special featuresBuilt-in-Heater feature Dual DirtLifter PowerBrushesIn-1 water tank CleanShotDry Aire Flow GaugeReadyTools dial Easy to remove and clean nozzleBefore you clean OperationPretreating optional Carpet cleaningOption B CleanShot Line Set ReadyTools Dial to the floor cleaning settingRemove formula tank from back of machine Machine for a snug fit7b. Remove the top of the tank by lifting up on the handle Manufacturer’s tag Cleaning with attachmentsSet Custom Clean for the desired setting Coil flex hose around the tool caddy Cleaning fluid sectionReturn ReadyTools dial to floor setting Attach the cleaning tool to the end of the hoseStain removal Fill the 2-in-1 water tank with hot tap water and set aside Hard floor cleaningCheck ReadyTools dial. It should be set on floor cleaning Plug into an outlet and turn the power switch and heater onAllow adequate time for floors to dry Maintenance and careMachine storage Machine careAfter carpet is dry, vacuum again to remove hair and fuzz Head screwdriver and rinsed clean. Replace after cleaningReduce Spray or No Spray TroubleshootingBuilt-in heater ready light does not illuminate Reduce Spray or No Spray DirtLifter PowerBrushes do not turnCleaner not picking up solution ReadyTools dial may be at wrong settingM. 8 p.m. EST Authorized service representativePO Box Grand Rapids MI Attn Consumer Services M. 10 p.m. ESTNot all parts are included with every model Replacement parts Bissell ProHeatReplacement Parts Item Part NoEarn Rewards Points If your Bissell product should require service Warranty Bissell ProHeatLimited One Year Warranty

9600 specifications

The Bissell 9600 is an advanced carpet cleaner that excels in deep cleaning performance while offering a range of innovative features designed to make the process as efficient and user-friendly as possible. This powerful machine stands out in the crowded market of cleaning devices with its exceptional capabilities in removing tough stains, dirt, and allergens from carpets and upholstery.

One of the primary features of the Bissell 9600 is its dual tank system. This design separates clean water from dirty water, ensuring that users always apply fresh, clean solution for effective cleaning. The clean tank holds water and cleaning solution, while the dirty tank collects the wastewater, making it easy to see when it’s time to empty. This separation not only enhances cleaning efficiency but also simplifies the cleaning process.

The Bissell 9600 is equipped with powerful suction technology that works in tandem with its cleaning brushes. The machine uses rotating brushes to agitate and lift dirt from the carpet fibers while the strong suction removes the loosened debris effectively. This combination of scrubbing and suction results in superior cleaning performance, making it ideal for homes with pets or children.

A key characteristic of the Bissell 9600 is its lightweight design. Unlike many traditional carpet cleaners that can be bulky and cumbersome, the 9600 is easy to maneuver, making it suitable for various spaces and providing excellent portability. This ease of movement is further enhanced by its ergonomic handle, which ensures a comfortable grip during operation.

Another noteworthy technology featured in the Bissell 9600 is the Heatwave Technology. This innovative feature helps to maintain the water temperature throughout the cleaning process, ensuring optimal cleaning effectiveness. Warm water enhances the action of carpet cleaning solutions, leading to better stain removal and a deep clean.

Additionally, the Bissell 9600 comes with a range of specialized tools and accessories, including a tough stain tool and an upholstery tool. These attachments enable users to tackle stains and messes on various surfaces beyond just carpets, such as stairs, furniture, and other fabric surfaces.

In terms of maintenance, the Bissell 9600 is designed for easy upkeep. The formula tanks and cleaning brushes can be easily removed and rinsed, ensuring that the machine stays ready for the next cleaning task.

Overall, the Bissell 9600 combines powerful suction, advanced cleaning technologies, and user-friendly features, making it a reliable choice for those seeking a thorough carpet cleaning solution. Its versatility and ease of use make it suitable for everyday cleaning tasks, helping to maintain a clean and healthy home environment.
Top Page Image Contents