Yamaha AW4416 manual Locating to a specific point, Cursor

Chapter6—Transport/locate operations

Locating to a specific point

You can directly specify a locate point as a numerical value, and locate to it. Here’s how.

1.With the transport stopped, press the [NUM LOCATE] key of the Locate section.

	MARK SEARCH
NUM	7	8	9
			MARK
LOCATE
		LAST REC
AUTO	4	5	6
	IN	OUT	SET
PUNCH
	1	2	3
REPEAT	A	B	ROLL
			BACK
	0		CANCEL
	RTZ

NO

If you have selected a screen where normal transport operations cannot be per- formed, such as the SONG screen or the MASTERING screen, the [NUM LOCATE] key cannot be used even if the cursor is displayed at the counter in the upper part of the display.

The cursor will move to the counter in the upper part of the display.

Cursor

2.To specify the locate point using the [DATA/JOG] dial, use the CURSOR

[]/[] keys to move the cursor to the digit that you wish to change, and rotate the [DATA/JOG] dial to specify the value.

3.To specify the locate point using the numeric keys (keys 0–9 of the locate section), move the cursor to the lowest digit of the value you wish to input, and use the numeric keys to directly input the value.

If the time display (SECOND) is selected as the counter display type, you can specify the value as hours/minutes/seconds/milliseconds; if time code display (TIME CODE) is selected, you can specify hours/minutes/seconds/frames/sub- frames; if measure display (MEASURE) is selected, you can specify measures/ beats.

4.To execute the Locate operation, press the [ENTER] key.

114 — Operation Guide