Yamaha AW4416 manual Creating a new automix

Chapter14—Automix

Creating a new automix

In order to record an automix, you must first create a new automix.

When you create a new automix, the contents of the current automix will be erased. If you wish to save the contents of the current automix, refer to page 228 “Storing an automix.”

1.While playing back the beginning of the song, set the channel faders, pan, EQ, and effect send/return etc., and save the settings in a scene memory.

The scene you save here will be the starting point for recording the automix. Alternatively, if you wish to use a previously-recorded scene as the starting point for the automix, recall that scene.

2.Press the [AUTOMIX] key → [F2] key.

The following display will appear.

NEW MIX button

3.Move the cursor to the NEW MIX button in the upper right of the screen, and press the [ENTER] key.

A message of “Will Make New Automix, ARE YOU SURE?” will appear.

4.Move the cursor to the OK button and press the [ENTER] key.

The current automix will be erased, and the automix will be initialized.

Note

If you decide to cancel without creating a new automix, move the cursor to the

CANCEL button after step 3, and press the [ENTER] key.

214 — Operation Guide