Yamaha AW4416 manual Overwriting events

Chapter14—Automix

The on-screen PLAY button will turn on (the STOP button will turn off), and auto- mix will begin playing automatically.

Note

If you begin playback from the middle of the song, automix will also begin playing from the same location. At this time if any automix events exist before the playback start location, automix will begin playback from a state of having executed all of these earlier events (i.e., the mix will be updated before playback begins).

5.To stop automix playback, move the cursor to the on-screen STOP but- ton and press the [ENTER] key, or press the top panel [STOP] key.

Even if automix is not stopped manually in this way, it will stop automatically after all of the recorded automix events have been played.

Overwriting events

New data can be overwritten (added or rewritten) onto a previously-recorded automix, either on a different channel or different mix element on the same chan- nel. For example after recording fader operations for monitor channel 1, you can then record fader operations for monitor channel 2, or record pan operations on the same channel. The following explanation shows pan or EQ operations can be overwritten onto an automix that already contains previously-recorded opera- tions of the monitor channel faders.

You can use the same procedure to overwrite (rewrite) the previously-recorded events of a previously-recorded channel. In this case, the previously-recorded content will be erased when you begin overwrite-recording.

1.Press the [HOME] key of the FADER MODE section, and the [MONI] key of the MIXING LAYER section.

2.Locate the song to a point slightly before the location where you wish to begin overwriting.

3.Press the [AUTOMIX] key → [F1] key.

On

— Operation Guide 219