Yamaha AW4416 Play back the audio source connected to the input jacks of the I/O cards slots 1/2

Chapter8—Patching

6.Play back the audio source connected to the input jacks of the I/O cards (slots 1/2).

The levels of the signals sent from the I/O card INPUT to tracks 1–16 (i.e., record- ing levels) will be displayed in the level meter/counter.

7.As necessary, use the faders of input channels 1–16 to adjust the record- ing level of tracks 1–16.

The faders of input channels 1–16 will be reset to nominal level (0 dB) when Quick Rec is executed. Adjust the recording level if necessary.

If you wish to use the faders to adjust the recording level, the POST FADER but- ton must be turned on in the DIRECT OUT EXTRACT POSITION field of the UTILITY screen → Prefer.1 page.

8.When you finish recording on the AW4416, press the [ALL SAFE] key.

Record-ready and mute status will be canceled for all tracks.

— Operation Guide 145