Yamaha AW4416 manual Let’s record, Press the Locate section RTZ key

Chapter5—Recording on the AW4416

Let’s record!

1. Press the Locate section [RTZ] key.

	MARK SEARCH
NUM	7	8	9
			MARK
LOCATE
		LAST REC
AUTO	4	5	6
	IN	OUT	SET
PUNCH
	1	2	3
REPEAT	A	B	ROLL
			BACK
	0		CANCEL
	RTZ

NO

The level meter/counter and the display counter will rewind to zero (00:00:00.000).

Tip!

With the default settings of the song, hours (hours/minutes/seconds/milliseconds) are selected as the counter unit of the level meter/counter and display counter. However you may switch this to time code display (hours/minutes/seconds/frames/ sub-frames) or measure display (measure/beat/tick) if desired.

2.To begin recording, hold down the Transport section [REC] (●) key and press the [PLAY] (¨) key.

The [REC] key and [PLAY] key will light, and the red REC READY indicators of the [REC TRACK SELECT] keys 1/2 and the level meter/counter will change from blinking to lit.

When you attempt to record the signal being input from the DIGITAL STEREO IN jack, the display may sometimes indicate “DIGITAL-ST-IN-PROHIBIT,” and you will be unable to perform step 2. In this case, go to UTILITY screen Prefer.2 page ([UTILITY] key → [F3] key), and set CD/DAT DIGITAL REC to ENABLE. (For details refer to Reference Guide “UTILITY” screen.)

REW FF STOP PLAY REC

— Operation Guide 85