Yamaha AW4416 manual Press the ENTER key

Chapter11—Song management

3.Move the cursor to the list in the upper part of the display, and use the [DATA/JOG] dial to select the import source song from which you wish to import mixer data.

4.Press the [ENTER] key.

An “E” symbol will appear at the left edge of the list, and the corresponding song will be selected as the import source for mixer data.

•The current song cannot be selected as the import source. If you execute Import when the current song is marked with an “E” symbol, an error message will be displayed.

•It is not possible to select two or more songs as the import source.

5.Move the cursor to the MIXER IMP button and press the [ENTER] key.

The MIXER DATA IMPORT popup window will appear.

6.Turn on the button(s) for the type(s) of mixer data that you wish to import. (You may select more than one.)

•SCENE MEM. button ....Scene memories

•AUTOMIX button .........Automix

•TEMPO MAP button .....Tempo map

•LIBRARY button ...........Libraries (channel/EQ/dynamics/effect)

7.To execute the Import, move the cursor to the OK button and press the [ENTER] key.

Tip!

If you decide to cancel the Import command without executing, move the cursor to the CANCEL button and press the [ENTER] key.

184 — Operation Guide