Yamaha AW4416 manual Rollback function, Rollback time setting

Chapter6—Transport/locate operations

Rollback function

While the song is stopped or playing, you can press the [ROLL BACK] key of the Locate section to move the current location back by a fixed length. This is conve- nient when you are playing back, and come to a location that you wish to listen to once again. The rollback time is set to 5 seconds by default, but can be adjusted as desired.

	MARK SEARCH
NUM	7	8	9
			MARK
LOCATE
		LAST REC
AUTO	4	5	6
	IN	OUT	SET
PUNCH
	1	2	3
REPEAT	A	B	ROLL
			BACK
	0		CANCEL
	RTZ

NO

1. With the song stopped, press the [UTILITY] key → [F3] key.

Rollback time setting

2.Move the cursor to the ROLLBACK TIME field, and use the [DATA/JOG] dial to set the rollback time.

The rollback time can be adjusted in millisecond steps over a range of 0–5 sec- onds (default setting is 5 seconds).

3.When the song is stopped or playing, press the [ROLL BACK] key.

If the [ROLL BACK] key is pressed while stopped, the current location will simply move back by the length of the rollback time. If pressed while playing, playback will resume immediately after the rollback occurs.

— Operation Guide 113