Yamaha AW4416 manual Locating to the start/end points, Start point, End point

Chapter6—Transport/locate operations

Locating to the start/end points

The start point and end point normally correspond to the beginning and end of the song. When you create a new song, absolute time 00:00:00.000 will be set as the default start point. When you record a song, the last point in the song will automatically be set as the end point. (If you extend the length of the song, the end point will move accordingly.) You can locate to the start point by pressing the [ ] key of the Locate section, or to the end point by pressing the [ ] key.

	MARK SEARCH
NUM	7	8	9
			MARK
LOCATE
		LAST REC
AUTO	4	5	6
	IN	OUT	SET
PUNCH
	1	2	3
REPEAT	A	B	ROLL
			BACK
	0		CANCEL
	RTZ

NO

The start point and end point will be displayed as follows in the TRACK screen TR View page that appears when you press the [TRACK] key → [F1] key.

Start point End point

Tip!

The locations of the start point and end point can be adjusted as desired (→ P.123).

— Operation Guide 117