Yamaha AW4416 manual Raise the MONITOR OUT control/PHONES control

Chapter5—Recording on the AW4416

6.In the same way as for the input channels, set the PAN knobs of monitor channels 1/2 to far left (L16) for channel 1 and far right (R16) for chan- nel 2.

7.Make sure that [ON] keys 1/2 and the STEREO [ON] key are on, and raise faders 1/2 and the STEREO fader to the 0 dB position.

When tracks are paired, you must operate only one of the faders. Attempting to move both faders simultaneously will place a strain on the motor, and may cause malfunctions.

8.While producing sound on your instrument, watch the L/R level meters of the level meter/counter.

The signal from the rhythm machine (or drum mics) will be sent via tracks 1/2 → monitor channels 1/2 to the stereo bus. If the red 0 dB segment lights, lower fad- ers 1/2 (input level of monitor channels 1/2).

REMAIN			H		M			S		F	ms		WORD CLOCK			MTC	SCENE
												44.1k 48k			LOCK	MASTER
ABS
												INT EXT			VARI	SLAVE		E
REL
–dB	0															–dB	0
FINE 2																FINE 2
	6																6
10 12																10 12
14 20																14 20
18	30															18	30
20	42															20	42
26 60		2	3	4	5	6	7	8	9	10	11	12	13	14	15	26 60		R
	1															16	L
READY																READY
INPUT																INPUT

E

–dB 0

FINE 2

6

10 12

14 20

18 30

20 42

26 60	R
L
READY
INPUT

L/R level meter

9.Raise the MONITOR OUT control/PHONES control.

You can monitor the input signal via your monitor system or headphones.

Note that the signals being controlled here are not the signals recorded on the recorder; rather, they are the signals passing through the recorder. Operating the pan, fader, or [ON] key of a monitor channel will not affect the signal that is recorded.

84 — Operation Guide